Fabrication and Mechanical Property of ZrC/Cr2AlC Composites

doi:10.15541/jim20190143

Abstract

Abstract:

Cr₂AlC is a representative material in MAX phase family due to its combination of metallic and ceramic properties such as high electrical conductivity, high thermal conductivity, resistance to corrosion, good oxidation resistance. To further improve performance of Cr₂AlC, ZrC as a reinforcement was selected to reinforce Cr₂AlC matrix composites by hot pressing technique. Influence of ZrC content on the mechanical property of ZrC/Cr₂AlC composites has been investigated. The results showed that 10vol% ZrC/Cr₂AlC composite improved flexural strength (715 MPa) and Vickers hardness (7 GPa) by 80% and 106%, respectively, as compared with those of pure Cr₂AlC material. Date from this study indicate that Cr₂AlC MAX possesses broaden application potential.

Key words: ZrC/Cr₂AlC, composite, mechanical property, microstructure

CLC Number:

TQ174

XU Wei-Min, LI Shi-Bo, HU Shu-Jun, JIANG Ji-Peng, YU Wen-Bo, ZHOU Yang. Fabrication and Mechanical Property of ZrC/Cr₂AlC Composites[J]. Journal of Inorganic Materials, 2020, 35(1): 61-64.

Figures/Tables 4

References 18

[1]	BARSOUM M W . The M_n₊₁AX_n phases: a new class of solids; thermodynamically stable nanolaminates. Prog. Solid State Chem., 2000,28:201-281.
[2]	SUN Z M . Progress in research and development on MAX phases: a family of layered ternary compounds. Int. Mater. Rev., 2011,56(3):143-166.
[3]	WANG J Y, ZHOU Y C . Recent progress in theoretical prediction, preparation, and characterization of layered ternary transition- metal carbides. Annu. Rev. Mater. Res., 2009,39(1):415-443.
[4]	LI S B, YU W B, ZHAI H X , et al. Mechanical properties of low temperature synthesized dense and fine grained Cr₂AlC ceramics. J. Eur. Ceram. Soc., 2011,31(1/2):217-224.
[5]	YU W B, LI S B, SLOOF W G . Microstructure and mechanical properties of a Cr₂Al(Si)C solid solution. Mater. Sci. Eng. A, 2010,527(21/22):5997-6001.
[6]	LI S B, LI H L, ZHOU Y , et al. Mechanism for abnormal thermal shock behavior of Cr₂AlC. J. Eur. Ceram. Soc, 2014,34(5):1083-1088.
[7]	LI H L, LI S B, ZHOU Y . Cyclic thermal shock and crack healing behavior of a Cr₂AlC ceramic. Mater. Sci. Eng. A, 2014,607:525-529.
[8]	LI S B, XIAO L O, SONG G M , et al. Oxidation and self-healing behavior of a fine-grained Cr₂AlC ceramic. J. Am. Ceram. Soc, 2013,96(3):892-899.
[9]	WANG Y G, ZHU X J, ZHANG L T , et al. Reaction kinetics and ablation properties of C/C-ZrC composites fabricated by reactive melt infiltration. Ceram. Int, 2011,37(4):1277-1283.
[10]	ZHAO D, ZHANG C, HU H , et al. Ablation behavior and mechanism of 3D C/ZrC composite in oxyacetylene torch environment. Comp. Sci. Tech., 2011,71(11):1392-1396.
[11]	LI H L, LI S B, ZHANG L Q , et al. Synthesis and ultra-high temperature ablation behavior of a ZrC/Cr₂AlC composite. Ceram. Int., 2016,42(5):5686-5692.
[12]	XIAO L O, LI S B, SONG G M , et al. Synthesis and thermal stability of Cr₂AlC. J. Euro. Ceram. Soc., 2011,31(8):1497-1502.
[13]	AI M X, ZHAI H X, ZHOU Y , et al. Synthesis of Ti₃AlC₂ powders using Sn as an additive. J. Am. Ceram. Soc., 2006,89(3):1114-1117.
[14]	BARSOUM M W, ALI M, EL-RAGHY T . Processing and characterization of Ti₂AlC, Ti₂AlN and Ti₂AlC_0.5N_0.5. Met. Mater. Trans. A, 2000,31(7):1857-1865.
[15]	NINO A, TANAKA A, SUGIYAMA S , et al. Indentation size effect for the hardness of refractory carbides. Mater. Trans., 2010,51(9):1621-1626.
[16]	ZHU J, JIANG H, WANG F , et al. Synthesis, microstructure and mechanical properties of Cr₂AlC/Al₂O₃ in situ composites by reactive hot pressing. J. Eur. Ceram. Soc., 2014,34(16):4137-4144.
[17]	YING G, HE X, LI M , et al. Effect of Cr₇C₃ on the mechanical, thermal, and electrical properties of Cr₂AlC. J. Alloys Compd., 2011,509(31):8022-8027.
[18]	GONZALEZ-JULIANA J, LLORENTE J, BRAM M , et al. Novel Cr₂AlC MAX-phase/SiC fiber composites: synthesis, processing and tribological response. J. Euro. Ceram. Soc., 2017,37(2):467-475.

Fabrication and Mechanical Property of ZrC/Cr₂AlC Composites

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 4

References 18

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	DING Ling, JIANG Rui, TANG Zilong, YANG Yunqiong. MXene: Nanoengineering and Application as Electrode Materials for Supercapacitors [J]. Journal of Inorganic Materials, 2023, 38(6): 619-633.
[2]	WANG Bo, YU Jian, LI Cuncheng, NIE Xiaolei, ZHU Wanting, WEI Ping, ZHAO Wenyu, ZHANG Qingjie. Service Stability of Gd/Bi_0.5Sb_1.5Te₃ Thermo-electro-magnetic Gradient Composites [J]. Journal of Inorganic Materials, 2023, 38(6): 663-670.
[3]	CHEN Qiang, BAI Shuxin, YE Yicong. Highly Thermal Conductive Silicon Carbide Ceramics Matrix Composites for Thermal Management: a Review [J]. Journal of Inorganic Materials, 2023, 38(6): 634-646.
[4]	MA Xiaosen, ZHANG Lichen, LIU Yanchao, WANG Quanhua, ZHENG Jiajun, LI Ruifeng. 13X@SiO₂: Synthesis and Toluene Adsorption [J]. Journal of Inorganic Materials, 2023, 38(5): 537-543.
[5]	WU Shuang, GOU Yanzi, WANG Yongshou, SONG Quzhi, ZHANG Qingyu, WANG Yingde. Effect of Heat Treatment on Composition, Microstructure and Mechanical Property of Domestic KD-SA SiC Fibers [J]. Journal of Inorganic Materials, 2023, 38(5): 569-576.
[6]	ZHANG Shuo, FU Qiangang, ZHANG Pei, FEI Jie, LI Wei. Influence of High Temperature Treatment of C/C Porous Preform on Friction and Wear Behavior of C/C-SiC Composites [J]. Journal of Inorganic Materials, 2023, 38(5): 561-568.
[7]	HE Danqi, WEI Mingxu, LIU Ruizhi, TANG Zhixin, ZHAI Pengcheng, ZHAO Wenyu. Heavy-Fermion YbAl₃ Materials: One-step Synthesis and Enhanced Thermoelectric Performance [J]. Journal of Inorganic Materials, 2023, 38(5): 577-582.
[8]	CHEN Xinli, LI Yan, WANG Weisheng, SHI Zhiwen, ZHU Liqiang. Gelatin/Carboxylated Chitosan Gated Oxide Neuromorphic Transistor [J]. Journal of Inorganic Materials, 2023, 38(4): 421-428.
[9]	CHEN Lei, HU Hailong. Evolution of Electric Field and Breakdown Damage Morphology for Flexible PDMS Based Dielectric Composites [J]. Journal of Inorganic Materials, 2023, 38(2): 155-162.
[10]	FENG Jingjing, ZHANG Youran, MA Mingsheng, LU Yiqing, LIU Zhifu. Current Status and Development Trend of Cold Sintering Process [J]. Journal of Inorganic Materials, 2023, 38(2): 125-136.
[11]	XIE Bing, CAI Jinxia, WANG Tongtong, LIU Zhiyong, JIANG Shenglin, ZHANG Haibo. Research Progress of Polymer-based Multilayer Composite Dielectrics with High Energy Storage Density [J]. Journal of Inorganic Materials, 2023, 38(2): 137-147.
[12]	ZHU Qingong, ZHAO Gaoling, HAN Gaorong. Effect of Recombination Time on the Structure and Properties of P₂O₅-Al₂O₃ Heterogeneous Composite Glass [J]. Journal of Inorganic Materials, 2023, 38(2): 170-176.
[13]	HU Jiajun, WANG Kai, HOU Xinguang, YANG Ting, XIA Hongyan. Boron Phosphide with High Thermal Conductivity: Synthesis by Molten Salt Method and Thermal Management Performance [J]. Journal of Inorganic Materials, 2022, 37(9): 933-940.
[14]	LI Wenjun, WANG Hao, TU Bingtian, CHEN Qiangguo, ZHENG Kaiping, WANG Weiming, FU Zhengyi. Preparation and Property of Mg_0.9Al_2.08O_3.97N_0.03 Transparent Ceramic with Broad Optical Transmission Range [J]. Journal of Inorganic Materials, 2022, 37(9): 969-975.
[15]	FU Shi, YANG Zengchao, LI Honghua, WANG Liang, LI Jiangtao. Mechanical Properties and Thermal Conductivity of Si₃N₄ Ceramics with Composite Sintering Additives [J]. Journal of Inorganic Materials, 2022, 37(9): 947-953.