Journal of Inorganic Materials ›› 2018, Vol. 33 ›› Issue (7): 767-772.DOI: 10.15541/jim20170289

• Orginal Article • Previous Articles     Next Articles

Grain Size Effect on Dielectric, Piezoelectric and Ferroelectric Property of BaTiO3 Ceramics with Fine Grains

HUANG Yong-An, LU Biao, ZOU Yi-Xuan, LI Dan-Dan, YAO Ying-Bang, TAO Tao, LIANG Bo, LU Sheng-Guo   

  1. Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangdong Provincial Research Center on Smart Materials and Energy Conversion Devices, School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2017-06-08 Revised:2017-11-08 Published:2018-07-10 Online:2018-06-19
  • About author:HUANG Yong-An. E-mail: wangyongan_gdut@163.com

Abstract:

A series of highly dense barium titanate (BaTiO3) ceramics with average grain size ranging from 0.25 μm to 10.15 μm were prepared by either conventional sintering or a two-step sintering method, using ultrafine BaTiO3 powders prepared by hydrothermal approach. The impact of grain size on dielectric, piezoelectric and ferroelectric properties of BaTiO3 ceramics was investigated. Results indicate that the tetragonal phase of BaTiO3 ceramics increases with the increase of grain size. When the averaged grain size is above 1 μm, the relative dielectric constant (ε°) and piezoelectric coefficient (d33) at room temperature increase firstly with the decrease of grain size, with the maximum values of 5628 and 279 pC/N, respectively, at the grain size of 1.12 μm, and then decrease rapidly with further decrease of the grain size. The remanent polarization Pr of BaTiO3 ceramics rises with the increase of grain size, but the coercive field Ec exhibits opposite tendency. The variation of dielectric and piezoelectric properties resulted from the change of grain size is regarded as the impact of 90° domain size and the number of the grain boundaries, while the change of hysteresis loops is due to the change of the crystal field in the grains and the “pinning” effect of the surface layer on the grains.

 

Key words: barium titanate, grain size, two-step sintering, dielectricity, piezoelectricity, ferroelectricity

CLC Number: