Journal of Inorganic Materials ›› 2016, Vol. 31 ›› Issue (7): 705-710.DOI: 10.15541/jim20150631

• Orginal Article • Previous Articles     Next Articles

Preparation and Characterization of High Performance Zeolite T Membranes from Clear Solutions

LV You-Jia1, LI Hua-Zheng1, YANG Jian-Hua2, WANG Jin-Qu1,2, YIN De-Hong2, LU Jin-Ming2   

  1. (1. School of Petroleum and Chemical Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Panjin Campus, Panjin 124221, China; 2. Institute of Adsorption and Inorganic Membrane, Dalian University of Technology, Dalian 116024, China)
  • Received:2015-12-15 Revised:2016-01-28 Published:2016-07-20 Online:2016-06-22
  • About author:LV You-Jia. E-mail: youjiaa1990@sina.com
  • Supported by:
    National High Technology Research and Development Program of China (2015AA03A602);National Natural Science Foundation of China (21376036)

Abstract:

T-type zeolite membrances with high permeation performance were successfully synthesized on the low cost macroporous α-Al2O3 tubular support by secondary growth from clear solutions. The effects of the concentration of seeds and the membrane crystallization time on the morphology and pervaporation properties of zeolite T membrances. When the molar ration of the synthesis solution was 1SiO2:0.05Al2O3:0.26Na2O:0.09K2O: 30H2O, a high quality T zeolite membrane was obtained at crystallization temperature of 120 ℃ for 16 h, with water flux of 2.96 kg/(m2·h) and separation factor of 6400 for dehydration of IPA aqueous solution by pervaporation at 75℃. XRD pattern and SEM observation suggested that the shortened membrane crystallization time resulted from the secondary nucleation induced by the seeds and the seeds epitaxial growth.

Key words: T-type zeolite membrance, varying temperature hot dip-coating method, secondary growth, pervaporation

CLC Number: