[1] Greusic J E, Marcos H M, van Uitert L G. Laser oscillation in ND doped yttrium aluminium, yttrium gallium, and gadolinium garnets. Appl. Phys. Lett., 1964, 4(10): 182–186.[2] Yin J, Liu Z G, Liu H, et al. The epitaxial growth of wurtzite ZnO films on LiNbO3 (0001) substrates. J. Cryst. Growth, 2000, 220(3): 281–285.[3] Kulinich S A, Yanaki T, By Sakh S, et al. Epitaxial LiNb0.5Ta0.5O3 films on LiTaO3 and LiNbO3 substrates grown by thermal plasma. J. Cryst. Growth, 2003, 247(3/4): 408–418.[4] Zhang, Q, Yoou S F, Zhgoon S, et al. Study of diamond-like carbon films on LiNbO3. Thin Solid Films, 2000, 360(1/2): 274–277.[5] Nakagawara O, Saeki M, Watanabe M, et al. Epitaxially grown aluminum films with titanium intermediate layer on theta rotated Y-X LiNbO3 piezoelectric single crystal substrates. J. Cryst. Growth, 2003, 249(3/4): 497–501.[6] kim R H, Park H H, Joo G T. The growth of LiNbO3(006) on MgO(001) and LiTaO3(012) substrates by Sol-Gel procedures. Appl. Sur. Sci., 2001, 169-170: 564–569.[7] Zhao Miao,??Zhou Daibing,??Tan Manqing,??et al. Preparation of Si/SiO2 optical thin film by double source electron beam evaporation technology. Chinese Journal of Semiconductors, 2006, 35(9): 1586–1589.[8] LI?Da-wei, TAO?Chun-xian, LI?Xiao, et al. Comparison of laser induced damage at 1064 nm and 532 nm to high-reflective film fabricated by electron beam evaporation. High Power Laser and Particle Beams, 2008, 26(9): 1457–1460.[9] 朱从善, 汤家苗. 二氧化硅增透膜的制备方法. 中国专利, CN1197928.1998.11.04.[10] Tang Jiamiao, Zhu Congshan. Study on the strengthened antireflective coatings prepared from Sol-Gel process. Acta Optica Sinica, 1998, 20(2): 242–246.[11] Karimi A, Wang Y, Cselle T. Fracture mechanisms in nanoscale layered hard thin films. Thin Solid Films, 2002, 420(1): 275–280. |