[1] |
O’Regan B, Grätzel M. A low-cost high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature, 1991, 353(6346): 737-740.
|
[2] |
Yella A, Lee H, Grätzel M, et al. Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency. Science, 2011, 334(6056): 629-634.
|
[3] |
ZHAO Xiao-Chong, YANG Pan, LIN Hong, et al. Optimization of fabrication parameters of flexible dye-sensitized solar cells. Journal of the Chinese Ceramic Society, 2010, 38(1): 25-28.
|
[4] |
YANG Li, XIN Gang, MA Ting-Li, et al. Flexible dye-sensitized solar cells. Progress in Chemistry, 2009, 21(10): 2242-2249.
|
[5] |
Ito S, Murakami T, Liska P, et al. Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%. Thin Solid Films, 2008, 516(14): 4613-4619.
|
[6] |
Park N G, Kim K M, Kang M G, et al. Chemical sintering of nanoparticles: a methodology for low-temperature fabrication of dye-sensitized TiO2 films. Adv. Mater., 2005, 17(19): 2349-2353.
|
[7] |
Ikegami M, Suzuki J, Mayasaka T, et al. Improvement in durability of flexible plastic dye-sensitized solar cell modules. Solar Energy Materials & Solar Cells, 2009, 93(6/7): 836-839.
|
[8] |
MA Ting-Li. Progress in a new type of plastic organic solar cell. Progress in Chemistry, 2006, 18(2/3): 176-181.
|
[9] |
Hart J N, Menzies D, Cheng Y B, et al. A comparison of microwave and conventional heat treatments of nanocrystalline TiO2. Solar Energy Materials & Solar Cells, 2007, 91(1): 6-16.
|
[10] |
Uchida S, Tomiha M, Zakizawa H, et al. Flexible dye-sensitized solar cells by 28 GHz microwave irradiation. J. Photochem. Photobiol. A, 2004, 164(1/2/3): 93-96.
|
[11] |
Zhang D S, Yoshida T, Minoura H. Hydrothermal preparation of porous nano-crystalline TiO2 electrodes for flexible solar cells. J. Photochem. Photobiol. A , 2004 , 164(1/2/3): 159-166.
|
[12] |
Longo C, Freitas J, De PaoLi M A, et al. Performance and stability of TiO2/dye solar cells assembled with flexible electrodes and a polymer electrolyte. J. Photochem. Photobiol. A , 2003, 159(1): 33-39.
|
[13] |
Yamaguchi Takeshi, Tobe Nobuyuki, Matsumoto Daisuke, et al. Highly efficient plastic-substrate dye-sensitized solar cells with validated conversion efficiency of 7.6%. Solar Energy Materials & Solar Cells, 2010, 94(5): 812-816.
|
[14] |
Yamaguchi Takeshi, Tobe Nobuyuki, Matsumoto Daisuke, et al. Highly efficient plastic substrate dye-sensitized solar cells using a compression method for preparation of TiO2 photoelectrodes. Chem. Commun., 2007(45): 4767-4769.
|
[15] |
Weerasinghe H C, Sirimanne P M, Simon G P, et al. Cold isostatic pressing technique for producing highly efficient flexible dye-sensitised solar cells on plastic substrates. Progress in Photovoltaics, 2011, 20(3): 321-332.
|
[16] |
Shao J Z, Liu F J, Dong W W, et al. Low temperature preparation of TiO2 films by cold isostatic pressing for flexible dye-sensitized solar cells. Materials Letters, 2012, 68: 493-496.
|
[17] |
Zhang D S, Downing J A, Knorr F J, et al. Room-temperature preparation of nanocrystalline TiO2 films and the influence of surface properties on dye-sensitized solar energy conversion. J. Phys. Chem. B, 2006, 110(43): 21890-21898.
|
[18] |
Xiao Y M, Wu J H, Li Q H, et al. Preparation of photoanode and its application to flexible dye-sensitized solar cells. Chinese Sci. Bull., 2009, 54(16): 2425-2430.
|
[19] |
Nazeeruddin M K, Kay A, Rodicio I, et al. Conversition of light to electricity by cis-x2bis (2,2’-bipyridyl-4,4’-dicarboxylate) ruthenium (II) charge-transfer sensitizers (x=Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline TiO2 electrodes. J. Am. Chem. Soc., 1993, 115(14): 6382-6390.
|
[20] |
HUANG Yi-Min, LIU Zhi-Yong, WANG Xiao-Qi, et al. Tandem dye-sensitized solar cell based on metal mesh. Journal of Inorganic Materials, 2011, 26(7): 774-778.
|
[21] |
孔凡太, 戴松元, 王孔嘉. 多吡啶钌染料的优化设计及其在染料敏化太阳电池中的应用. 合肥: 安徽节能减排博士科技论坛, 2007: 604-608.
|