Spark Plasma Sintering Technology

Abstract

Abstract: Thc SPS (Spark Plasma Sintering) proccss is a new matcrials symttjesos proccssing technology recentlydcvclopcd by Sumitomo Coal Mining Co., Ltd., Japan. This paper describes the principles and fcaturcsof the SPS process, inluding the basic configuration of the Sumitom s SPS systcm, as well as the SPSproccss applications particularly in thc synthesis of thc functionally gradient inaterials and the high-density,finc-grains sintered ceramics including partly authors recent rescarch resnlts.

Key words: spark, plasma, sintering

Cite this article

GAO Lian,MIYAMOTO Hiroki. Spark Plasma Sintering Technology[J]. Journal of Inorganic Materials.

share this article

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.jim.org.cn/EN/

https://www.jim.org.cn/EN/Y1997/V12/I2/129

References

1 Tokita M. J. Society. Powder Technology Japan, 1993, 30: 790.

2 Omori M, Sakai H, Hirai T, et al. In: Ilschner B & Cherradi N, ed. Proceedings of 3rd Internatikonal Symposium on Structural and Functional Gradient Materials. Lausanne, Switzerlang, 1994. 71.

3 Omori M, Sakai H, Okubo A, Hirai T. In: Ilschner B & Cherradi N, ed. Proceedings of 3rd Internatikonal Symposium on Structural and Functional Gradient Materials. Lausanne, Switzerlang, 1994. 65.

4 Omori M, Sakai H, Okubo A, Hirai T. In: Ilschner B & Cherradi N, ed. Proceedings of 3rd Internatikonal Symposium on Structural and Functional Gradient Materials. Lausanne, Switzerlang, 1994.667.

5 Tamari N, Tanaka T, Tanaka K, Kondoh I. J. Ceram. Soc. Jap., 1995, 103: 740.

6 Nishimura T, Mitomo M, Hirotsuru H, Kawahara M. J. Mater. Sci. Lett., 1995, 14: 1046.

Related Articles 15

[1]	QIU Haiyang, MIAO Guangtan, LI Hui, LUAN Qi, LIU Guoxia, SHAN Fukai. Effect of Plasma Treatment on the Long-term Plasticity of Synaptic Transistor [J]. Journal of Inorganic Materials, 2023, 38(4): 406-412.
[2]	LI Yicun, LIU Xuedong, HAO Xiaobin, DAI Bing, LYU Jilei, ZHU Jiaqi. Rapid Growth of Single Crystal Diamond at High Energy Density by Plasma Focusing [J]. Journal of Inorganic Materials, 2023, 38(3): 303-309.
[3]	FENG Jingjing, ZHANG Youran, MA Mingsheng, LU Yiqing, LIU Zhifu. Current Status and Development Trend of Cold Sintering Process [J]. Journal of Inorganic Materials, 2023, 38(2): 125-136.
[4]	JIN Xihai, DONG Manjiang, KAN Yanmei, LIANG Bo, DONG Shaoming. Fabrication of Transparent AlON by Gel Casting and Pressureless Sintering [J]. Journal of Inorganic Materials, 2023, 38(2): 193-198.
[5]	PAN Yangyang, LIANG Bo, HONG Du, QI Zhixiang, NIU Yaran, ZHENG Xuebin. High Temperature Long-term Service Performance of TiAlCrY/YSZ Coating on TiAl Alloy [J]. Journal of Inorganic Materials, 2023, 38(1): 105-112.
[6]	FU Shi, YANG Zengchao, LI Honghua, WANG Liang, LI Jiangtao. Mechanical Properties and Thermal Conductivity of Si₃N₄ Ceramics with Composite Sintering Additives [J]. Journal of Inorganic Materials, 2022, 37(9): 947-953.
[7]	WEI Tingting, XU Huarui, ZHU Guisheng, LONG Shenfeng, ZHANG Xiuyun, ZHAO Yunyun, JIANG Xupeng, SONG Jinjie, GUO Ningjie, GONG Yipeng. Preparation and Properties of BaTiO₃ Ceramics by Low Temperature Cold Sintering [J]. Journal of Inorganic Materials, 2022, 37(8): 903-910.
[8]	CHEN Yongqiang, WANG Yixue, ZHANG Fan, LI Hongxia, DONG Binbin, MIN Zhiyu, ZHANG Rui. Preparation of Special Ceramics by Microwave Heating: a Review [J]. Journal of Inorganic Materials, 2022, 37(8): 841-852.
[9]	LIU Qiang, WANG Qian, CHEN Penghui, LI Xiaoying, ZHANG Lixuan, XIE Tengfei, LI Jiang. Fabrication and Characterizations of Red Ce-doped 8YSZ Transparent Ceramics by Two-step Sintering [J]. Journal of Inorganic Materials, 2022, 37(8): 911-917.
[10]	HONG Du, NIU Yaran, LI Hong, ZHONG Xin, ZHENG Xuebin. Tribological Properties of Plasma Sprayed TiC-Graphite Composite Coatings [J]. Journal of Inorganic Materials, 2022, 37(6): 643-650.
[11]	LIU Jinling, LIU Dianguang, REN Ke, WANG Yiguang. Research Progress on the Flash Sintering Mechanism of Oxide Ceramics and Its Application [J]. Journal of Inorganic Materials, 2022, 37(5): 473-480.
[12]	CAO Jiwei, WANG Pei, LIU Zhiyuan, LIU Changyong, WU Jiamin, CHEN Zhangwei. Research Progress on Powder-based Laser Additive Manufacturing Technology of Ceramics [J]. Journal of Inorganic Materials, 2022, 37(3): 241-254.
[13]	WANG Yaning, ZHANG Yuqi, SONG Suocheng, CHEN Ruomeng, LIU Yaxiong, DUAN Yugang. Laser Stereolithography for Zirconia Ceramic Fabrication and Its Debinding and Sintering Process [J]. Journal of Inorganic Materials, 2022, 37(3): 303-309.
[14]	ZHU Junyi, ZHANG Cheng, LUO Zhongqiang, CAO Jiwei, LIU Zhiyuan, WANG Pei, LIU Changyong, CHEN Zhangwei. Influence of Debinding Process on the Properties of Photopolymerization 3D Printed Cordierite Ceramics [J]. Journal of Inorganic Materials, 2022, 37(3): 317-324.
[15]	HUANG Longzhi, YIN Jie, CHEN Xiao, WANG Xinguang, LIU Xuejian, HUANG Zhengren. Selective Laser Sintering of SiC Green Body with Low Binder Content [J]. Journal of Inorganic Materials, 2022, 37(3): 347-352.

Metrics

Viewed

Full text

Abstract

Comments

Abstract
References
Related Articles
Recommended Articles
Metrics
Comments

TOP