Journal of Inorganic Materials

• Research Paper • Previous Articles     Next Articles

Preparation and Characteristic of Properties of High Transmission Nd:YAG Transparent Ceramic

LIU Wen-Bin1, KOU Hua-Min1, PAN Yu-Bai1, KARAKI Tomoaki2, LI Jiang1, GUO Jing-Kun1   

  1. 1. Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China;2. Toyama Prefectecral University, 939-0398 Toyama, Japan
  • Received:2007-11-29 Revised:2008-03-28 Published:2008-09-20 Online:2008-09-20

Abstract: Neodymium-doped yttrium aluminum garnet (Nd:YAG) precursor powders were fabricated by co-precipitation method, using Al(NO3)3·9H2O, Y(NO3)3·6H2O, (NH4)2SO4 and Nd(NO3)3 as raw materials, NH4HCO3 as precipitator, TEOS as sintering additive. After calcining the Nd:YAG precursor at 1200℃ for 5h, the well dispersive, spherical pure cubic YAG nano-powders with average particle size of about 100nm were obtained. Subsequently, calcined powders were molded by cold isostatic presses. Transparent ceramics of excellent transmission were obtained by sintering Nd:YAG green body at 1700-1800℃ for 10h in vacuum. The ceramic crystal grains with average size of about 15μm appear uniformity. There is no impurity and core in grain interface and inner-grain. No scattering center can be detected. The transmission of the sample with thickness of 1.5mm is 83.5% at the near infrared wavelength of 1064nm, which is very close to the theoretical value of Nd:YAG single crystal.

Key words: co-precipitation, nanopowder, Nd:YAG, transparent ceramic

CLC Number: