Journal of Inorganic Materials

• Research Paper • Previous Articles     Next Articles

High Pressure Sintering of AlN Ceramics

LI Xiao-Lei1,2, MA Hong-An1, ZUO Gui-Hong3, ZHENG You-Jin1,3, LI Ji-Gang 2, JIA Xiao-Peng1,2   

  1. (1. National Lab of Superhard Materials, Jilin University, Changchun 130012, China; 2. Henan Polytechnic University, Jiaozuo 454000, China; 3. Mudanjiang Teachers College, Mudanjiang 157012, China)
  • Received:2007-02-03 Revised:2007-04-03 Published:2008-01-20 Online:2008-01-20

Abstract: High-density aluminum nitride ceramics were fabricated without sintering additives under high pressure (3.1-5.0GPa) and different temperature (1300-1800℃) in China-type cubic anvil high-pressure and high-temperature apparatus, using AlN powder produced by SHS method as starting material. The effects of sintering conditions, i.e. time, temperature and pressure, on sintering characteristics of AlN ceramics were studied. The sintered bodies were characterized by XRD and SEM. The results show that high pressure sintering can lower the sintering temperature and shorten the sintering time. The microstructure of the sintered bodies is homogeneous. The relative density of AlN ceramics sintered at 5.0GPa and 1300℃ for 50min is 94.92%. The lattice parameters of the specimens sintered at 5.0GPa and 1700℃ for 125min are decreased by about 0.09% than that of the AlN powder.

Key words: AlN ceramics, high pressure sintering, densification

CLC Number: