Journal of Inorganic Materials

• Research Paper • Previous Articles     Next Articles

Preparation of Al2O3 and Y2O3-coated SiC Composite Particles

ZHANG Ju-Xian; YANG Jing-Yi+; GAO Long-Qiao; HOU Yao-Yong+; LI Fa   

  1. Beijing Vacuum Electronics Research Institute Beijing 100016 China; +Qingdao Institute of Chemical Technology Qingdao 266042 China
  • Received:1998-08-10 Revised:1998-11-09 Published:1999-06-20 Online:1999-06-20

Abstract: Al2O3and Y2O3-coated SiC composite particles were prepared from SiC coated uniformly with Al(OH)3 and Y(OH)3 by
heterogeneous nucleation process. The IEP of as-received SiC is pH 3.4, that of Al(OH)3-coated SiC shift to pH 7.3. When Al(OH)3-coated
SiC composite particles were coated with Y(OH)3, its IEP is about pH 8.6. In addition, the viscosity behavior of SiC was changed via coating. The
coating ratio is over 95% according to the results of hydrochloric acid titration, that is, 95% of added coating materials can be coated on the surfaces of SiC
particles by heterogeneous nucleation process.

Key words: coating, heterogeneous nucleation precess, SiC composite particles, coating ratio

CLC Number: