无机材料学报

• 研究论文 • 上一篇    下一篇

水热合成KAl(OH)2CO3粉体的形貌控制

张向锋; 温兆银; 顾中华; 徐孝和; 林祖纕   

  1. 中国科学院上海硅酸盐研究所 上海 200050
  • 收稿日期:2003-10-14 修回日期:2003-01-05 出版日期:2004-11-20 网络出版日期:2004-11-20

Effect of Precursors on the Hydrothermal Synthesis of KAl(OH)2CO3 Powder

ZHANG Xiang-Feng; WEN Zhao-Yin; GU Zhong-Hua; XU Xiao-He; LIN Zu-Xiang

  

  1. Shanghai Institute of Ceramics; Chinese Academy of Sciences; Shanghai 200050; China
  • Received:2003-10-14 Revised:2003-01-05 Published:2004-11-20 Online:2004-11-20

摘要: 分别采用AlCl3·6H2O,Al(NO3)3·6H2O,Al2(SO4)3·12H2O为前驱体在水热条件下合成了。KAl(OH)2CO3粉体.实现了KAl(OH)2CO3粉体的微观形貌从纤维状微米级颗粒到柱状两维纳米级颗粒的控制.XRD、TEM等的分析结果表明,水热体系中的铝盐种类、阴离子浓度以及反应时间等条件对所合成产物的颗粒形貌有显著的影响.其中Al(NO3)3是合成KAl(OH)2CO3的最佳前驱物,当[NO3-]=1.2mol/L时,在120℃,反应4h条件下合成的粉体颗粒直径小于20nm,长径比约为5,且外形规整,粒度分布均匀,没有团聚.

关键词: KAl(OH)2CO3, 水热合成, 片钠铝石

Abstract:

KAl(OH)2CO3 powders with different morphology were synthesized by the hy-drothermal method using AlCl3·6H2O, Al(NO3)3·6H2O, Al2(SO4)3·12H2O as the precursors at 120℃ for 24h. The results show that Al(NO3)3·6H2O is the best precursor for the synthesis of KAl(OH)2CO3. The KAl(OH)2CO3 powder synthesized in the hydrothermal aqueous with NO3-concentration of 1.2mol/L possesses particle sizes of less than 20nm, slenderness ratio of less than 5 , and good size distribution.

Key words: hydrothermal method, KAl(OH)2CO3, dawsonite

中图分类号: