喷雾热分解合成技术及其在材料研究中的应用

摘要/Abstract

摘要： 喷雾热分解(Spray Pyrolysis,简称SP)技术是一种很有发展前途的材料制备方法,与传统的材料制备技术相比,它具有很多优越性;如生成物颗粒可控,成分均匀,纯度较高,工艺过程温度低等,已在材料科学的许多领域中得到应用.SP技术在物理和化学方面的灵活性,为合成先进的陶瓷粉体和薄膜提供了更多的机会.本文简要地综述了SP技术以及在陶瓷粉体合成以及薄膜制备等方面的应用.

关键词: 喷雾热分解（SP）技术, 材料研究, 应用

Abstract: The spray pyrolysis technique is a wonderful method in material science. It possesses many advantages, such as low processing temperature, high homogeneity and purity of products, and so on. The key challenges of spray pyrolysis are control over the morphology and composition of product particles. It has been widely applied in the past few years. In this paper, the spray pyrolysis technique and the applications in production of ceramic powders, films, and fibers were briefly reviewed.

Key words: spray pyrolysis technique, material science, application

中图分类号:

TQ174

徐志军,初瑞清,李国荣,殷庆瑞. 喷雾热分解合成技术及其在材料研究中的应用[J]. 无机材料学报.

XU Zhi-Jun,CHU Rui-Qing,LI Guo-Rong,YIN Qing-Rui. Applications of Spray Pyrolysis Technique in Material Science[J]. Journal of Inorganic Materials.

参考文献

[1] Gary L Messing, Shi-Chang Zhang, Gopal V Jayanthi. J. Am. Ceram. Soc., 1993, 76: 2707--2726.
[2] Pramod S. Patil, Mater. Chem. Phys., 1999, 59: 185--198.
[3] Huang C S, Tao m C S, Lee C H. J. Electrochem. Soc., 1997, 144: 3556--3561.
[4] Arya S P S, Hinterman H E. Thin Solid Films, 1990, 193-194: 841--846.
[5] Yoshida M M, Andrade E. Thin Solid Films, 1993, 224: 87--96.
[6] Siefert W. Thin Solid Films, 1984, 121: 267--274.
[7] Msears W, Gee M A. Thin Solid Films, 1988, 165: 265--277.
[8] Blandenet G, Court M, Lagarde Y. Thin Solid Films, 1981, 77: 81--90.
[9] Chen C H, Buysman A A j, Kelder E M, et al. Solid State Ionic, 1995, 80: 1.
[10] Vkilledar V, Uplane M D, Lokhande C D, et al. Ind. J. Pure and Appl. Phys., 1995, 33: 773.
[11] Liu M, Zhou M L, Zhai L H, et al. Physica C 2003, 386: 366--369.
[12] Gardner T J, Messing G L. Am. Ceram. Soc. Bull, 1984, 64: 1498--1501.
[13] Nesic S, Vodnik J. Chem. Eng. Sci., 1991, 46: 527--537.
[14] Friedlander S K, Smoke, Dust, Haze. Fundamentals of Aerosol Behavior. Wiley, New York: 1977.
[15] Messing G L, Zhang S C. Ceramic Nanoparticle Synthesis by Spray Pyrolysis, in Euro-Ceramics-Ⅱ, G.Ziegler, H.Hausner. Deutsche Keramische Gesellschaft,
Cologne, Germany, 1993. 185--190.
[16] Hilarius V, Hohenberger G. Chemical Powder Procssing of ZnO Varistor Material, 94th Annual Meeting of the American Ceramic Society, Minneapolis, MN, April, 1992.
[17] Martin C B, Kurosky R P, Maupin B, et al. Spray Pyrolysis of Multicomponent Ceramic Powders. In: Ceramic Transactions. Messing G L, Hirano S, Hausner H, ed.
Ceramic Powder Science III. Westerville, OH: American Ceramic Society, 1990. 12. 99--106.
[18] Barringer E A, Bower H K. J. Am. Ceram. Soc., 1982, 65: C-199--C-201.
[19] Tian Y, Dewan H, Brodwin M, et al. Microwave Sintering of Alumina Ceramics. In: Ceramic Transactions. Handwerker C, Blendell J, Kaysser W, ed. Sintering of Advaced
Ceramics. Westerville, OH: American Ceramic Society. 1990. 7. 391--401.
[20] Slamovich E B, Lange F F. Spherical Zirconia Particles via Electrostatic Atomization: Fabrication and Sintering Characteristies. In: Materials Research Society
Symposium Proceedings. Pittsburgh, PA: Materials Research Society. 1988. 12. 257--262.
[21] Roy D M, Neurgaonkar R R, O’Holleran T P, et al. Am. Ceram. Soc. Bull, 1997, 56: 1023--1024.
[22] Kodas T T, Engler E M, Lee V, et al. Appl. Phys. Lett, 1988, 52: 1622--1624.
[23] Odier P, Dubois B, Clinard C, et al. Processing of Ceramic Powder by the Spray Pyrolysis Method: Influence of the Precursors. Examples of Zirconia and Yba$_2$Cu$_3$O$_7$,
In: Ceramic Transactions. Messing G L, Hirano S, Hausner H, ed. Ceramic Powder Science III. Westerville, OH: American Ceramic Society. 1990. 12. 75--89.
[24] Dubois B, Ruffier D, Odier P. Homogeneous and Fine YO-Stabilizer ZrO Powders Prepared by a Spray Pyrolysis Method. In: Ceramic Powder Processing Science.
Hausner H, Messing G L, Hirano S. Koln, Germany: Deutsche Keramische Gesellschagt. 1988. 229--236.
[25] Dubois B, Ruffier D, Odier P. J. Am. Ceram. Soc., 1989, 72 (4): 713--715.
[26] Sakurai O, Miyauchi M, Mizutani N, et al. J. Ceram. Soc. Jpn, 1989, 97: 398--403.
[27] Ciminelli R R, Messing G L. Ceramica (SaoPaulo), 1984, 30 (174): 131--138.
[28] Zhang S C, Messing J L, Borden M. J. Am. Ceram. Soc, 1990, 73: 61--67.
[29] Kato A, Nitta K, Hirata Y. J. Chem. Soc. Jpn., 1983, 10: 1544--1546.
[30] Pebler A R. J. Mater. Res, 1990, 5: 680--682.
[31] Jayanthi G V, Zhang S C, Messing G L. J. Aerosol Sci. Technol, 1993, 19 (4): 478--490.
[32] Lang R. J. Acoust. Soc. Am, 1959, 31: 68--74.
[33] Sproson D W, Messing G L, Gardner Y J. Ceram. Int, 1986, 12: 3--7.
[34] Zhang S C, Messing G L, Huebner W. J. Aerosol. Sci, 1991, 22: 585--597.
[35] Suyama Y, Kato A. Ceram, Int. 1982, 8: 17--21.
[36] IversTiffee E, Seitz K. Am. Ceram, Soc. Bull, 1987, 66 (9): 1384--1388.
[37] 傅希贤, 单志兴, 曾淑兰. 应用科学学报, 1997, 15 (2): 249--252.
[38] Lang R J. J. Acoust. Soc. Am., 1962, 34: 6--8.
[39] Rajan R, Pandit A B. Ultrasonics, 2001, 39: 235--255.
[40] Ishizawa H, Sakurai O, Izutani N M, et al. Am. Ceram. Soc. Bull, 1986, 65: 1399--1404.
[41] Ishizawa H, Sakurai O, Izutani N M, et al. Yogyo Kyokaishi, 1985, 93 (7): 382.
[42] Tohge N, Tatsumisago M, Minami T, et al. Jpn. J. Appl. Phys, 1988, 27 (6): L1086--L1088.
[43] Zhao Xinyu, Zheng Baicun, Li Chunzhong, et al. Powder Technology, 1998, 100: 20--23.
[44] Mizutani N, Liu T Q. Synthesis of Spherical Si$_3$N$_4$ Powder by Spray Pyrolysis of Polysilazane. In: Ceramic Transactions. Messing G L, Hirano S, Hausner H, ed. Ceramic
Powder Science III. Westerville, OH: American Ceramic Society. 1990. 12. 59--73.
[45] Lindquist D A, Kodas T T, Smith D M, et al. J. Am. Ceram. Soc, 1991, 74: 3126--3128.
[46] Chen Zhenhua, Chen Gang, Yan Hongge, et al. Mater. Res. Bull, 2003, 38: 1487--1492.
[47] Niihara K. J. Jpn. Ceram. Soc, 1991, 99: 974.
[48] Carim A H, Douherty P, Kodas T T, et al. Mater. Lett, 1989, 8: 335--339.
[49] Choa Y H, Yang J K, Kim B H, et al. J. Magn. Mater, 2003, 266: 12--19.
[50] Kanno Y, Suzuki T. J. Mater. Sci, 1988, 23: 3067--3072.
[51] Sproson D W. “Precursor and Additive Effects on the Characteristics of Powder Synthesized by Evaporative Decomposition of Solutions”, Thesis M S. Pennsylvania
State University, University Park, PA. 1986.
[52] 周晓东, ZHANG S C, 古宏晨(ZHOU Xiao-Dong, et al). 无机材料学报 (Journal of Inorganic Materials), 1998, 13 (3): 401--406.
[53] Blancher G, Fincher C R. Jr, Supercond. Sci. Technol, 1991, 4: 69--72.
[54] Jergel M, Chromik S, Strbik V, et al. Supercond. Sci. Technol, 1992, 5: 225--230.
[55] Vermat K K, Sexena A K, Singh,m K, et al. Supercond. Sci. Technol, 1992, 5:
163--167.
[56] Afify H H, Nasser S A, Demian S E. J. Mater. Sci, 1991, 2: 152--156.
[57] Falcony C, Garcia M, Ortiz A, et al. J. Appl. Phys, 1992, 72: 1525--1527.
[58] Weng S, Cocivera M. J. Electrochem. Soc, 1992, 139: 3220--3224.
[59] Kumari S, Singh A K, Srivastava O N. Supercond. Sci. Technol, 1996, 9: 405.
[60] Pawar S H, Pawaskar P N. Mater. Res. Bull, 1995, 30: 277--280.
[61] Moriwaki Y, Sugano T, Gasser C, et al. Appl. Phys. Lett, 1996, 69: 3423--3425.
[62] Kobayashi M, Okding T R, Sayer M, et al. Ultrasonics, 2002, 39: 675--680.