无机材料学报

• 研究论文 • 上一篇    下一篇

支撑液膜法制备Cu7S4纳米晶

孙冬梅1; 吴庆生1; 丁亚平2   

  1. 1. 同济大学化学系, 上海 200092; 2. 上海大学化学系 上海 200436
  • 收稿日期:2003-04-28 修回日期:2003-07-02 出版日期:2004-05-20 网络出版日期:2004-05-20

Fabrication of Cu7S4 Nano-crystals with Supported Liquid Membrane

SUN Dong-Mei1; WU Qing-Sheng1; DING Ya-Ping2   

  1. 1.Department of Chemistry; Tongji University; Shanghai 200092; China; 2. Department of Chemistry; Shanghai University; Shanghai 200436; China
  • Received:2003-04-28 Revised:2003-07-02 Published:2004-05-20 Online:2004-05-20

摘要: 提出了一种全新的纳米材料制备方法—支撑液膜法。常温常压条件下,在0.2mol/L的CuCl2溶液和0.2mol/L的Na2S溶液、以及含邻菲罗啉载体的支撑液膜组成的共同反应体系中进行反应,成功制备出Cu7S4纳米晶。经XRD、TEM等表征,产物的粒径范围为5~10nm,结构为六方晶型,晶胞参数为a=15.475、c=13.356.本文还对其光学性质及产物形成机理进行了初步探讨.

关键词: 支撑液膜, 纳米晶, Cu7S4, 流动载体

Abstract: A novel fabrication method of Cu7S4 nano-crystals by supported liquid membrane (SLM) system was investigated. SLM consists of CHCl3 as solvent, o-phenanthroline as a mobile carrier and polymer membrane as supported template. The results indicated that Cu7S4 which has hexagonal structure with cell constant of a=15.475Aand c=13.356Acan be prepared at room temperature with 0.2mol/L CuCl2 and 0.2mol/L Na2S as reactants. The average size of Cu7S4 is about 7nm. In addition, the forming mechanism and optical properties of Cu7S4 were discussed.

Key words: supported liquid membrane, nano-crystals, Cu7S4, mobile carrier

中图分类号: