[1] |
KOYANAGI T, TERRANI K, HARRISON S, et al. Additive manufacturing of silicon carbide for nuclear applications. Journal of Nuclear Materials, 2021, 543: 152577.
|
[2] |
WANG X, GAO X, ZHANG Z, et al. Advances in modifications and high-temperature applications of silicon carbide ceramic matrix composites in aerospace: a focused review. Journal of the European Ceramic Society, 2021, 41(9): 4671.
|
[3] |
SINGH S, RATHI K, PAL K. Synthesis, characterization of graphene oxide wrapped silicon carbide for excellent mechanical and damping performance for aerospace application. Journal of Alloys and Compounds, 2018, 740: 436.
|
[4] |
魏华阳, 赵小玻, 徐鸿照, 等. 固含量对凝胶注模成型碳化硅陶瓷性能的影响. 现代技术陶瓷, 2016, 37(4): 296.
|
[5] |
王阳阳, 贾晨, 徐敏, 等. 注浆成型碳化硅陶瓷材料成型工艺研究. 佛山陶瓷, 2023, 33(10): 23.
|
[6] |
WANG Y, CHENG Y, CHEN Y, et al. Lattice-structured SiC ceramics obtained via 3D printing, gel casting, and gaseous silicon infiltration sintering. Ceramics International, 2022, 48(5): 6488.
|
[7] |
HE R, ZHOU N, ZHANG K, et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 2021, 10(4): 637.
|
[8] |
BAI X, DING G, ZHANG K, et al. Stereolithography additive manufacturing and sintering approaches of SiC ceramics. Open Ceramics, 2021, 5: 100046.
|
[9] |
HASSANIN H, ESSA K, ELSHAER A, et al. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics, 2021, 10(1): 1.
|
[10] |
WANG K, YIN J, CHEN X, et al. Microstructure and properties of liquid phase sintered SiC ceramics fabricated via selective laser printing and precursor impregnation and pyrolysis. Ceramics International, 2024, 50(3): 4315.
|
[11] |
WANG K, YIN J, CHEN X, et al. Advances on direct selective laser printing of ceramics: an overview. Journal of Alloys and Compounds, 2024, 975: 172821.
|
[12] |
CHEN X, YIN J, LIU X, et al. Effect of laser power on mechanical properties of SiC composites rapidly fabricated by selective laser sintering and direct liquid silicon infiltration. Ceramics International, 2022, 48(13): 19123.
|
[13] |
CHEN X, YIN J, HUANG L, et al. Microstructural tailoring, mechanical and thermal properties of SiC composites fabricated by selective laser sintering and reactive melt infiltration. Journal of Advanced Ceramics, 2023, 12(4): 830.
|
[14] |
LI H, LIU Y, LIU Y, et al. Influence of sintering temperature and CVI time on mechanical properties of 3D-printed alumina ceramics. Materials Letters, 2021, 285: 129096.
|
[15] |
JIN L, ZHANG K, XU T, et al. The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIP. Ceramics International, 2018, 44(17): 20992.
|
[16] |
ZHONG H, WANG Z, ZHOU H, et al. Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilane. Ceramics International, 2017, 43(10): 7387.
|
[17] |
张喜飞, 陈定, 顾华志, 等. 碳源对反应烧结碳化硅性能的影响. 硅酸盐通报, 2024, 43(1): 312.
|
[18] |
GU X S, YIN J, WANG K L, et al. Effect of particle grading on properties of silicon carbide ceramics by binder jetting printing. Journal of Inorganic Materials, 2023, 38(12): 1373.
|
[19] |
XING Y Y, WU H B, LIU X J, et al. Grain composition on solid- state-sintered SiC ceramics. Journal of Inorganic Materials, 2018, 33(11): 1167.
|
[20] |
夏思婕. 碳化硅粉末激光选区烧结/冷等静压复合工艺及其后处理研究. 武汉: 华中科技大学硕士学位论文, 2016.
|
[21] |
陈鹏, 朱小刚, 吴甲民, 等. 基于SLS/CIP工艺SiC陶瓷的制备及其性能. 材料工程, 2019, 47(3): 87.
|
[22] |
PELANCONI M, COLOMBO P, ORTONA A. Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis. Journal of the European Ceramic Society, 2021, 41(10): 5056.
|
[23] |
张坤. 基于SLS和PIP的SiCp/SiC陶瓷基复合材料成型机理及其性能研究. 哈尔滨: 哈尔滨理工大学博士学位论文, 2021.
|