无机材料学报 ›› 2024, Vol. 39 ›› Issue (4): 359-366.DOI: 10.15541/jim20230424

• 研究论文 • 上一篇    下一篇

上转换发光纳米材料对钙钛矿太阳能电池迟滞效应和离子迁移动力学的影响

于嫚1(), 高荣耀2, 秦玉军2, 艾希成2()   

  1. 1.西安航空学院 材料工程学院, 西安 710077
    2.中国人民大学 化学系, 北京 100872
  • 收稿日期:2023-09-18 修回日期:2023-11-29 出版日期:2024-04-20 网络出版日期:2023-12-19
  • 通讯作者: 艾希成, 教授. E-mail: xcai@ruc.edu.cn
  • 作者简介:于 嫚(1989−), 女, 博士. E-mail: yuman@xaau.edu.cn
  • 基金资助:
    国家自然科学基金(21903062);国家自然科学基金(21973112);陕西省科学技术协会青年人才托举计划项目(20220462);国家级大学生创新创业训练计划项目(202311736016)

Influence of Upconversion Luminescent Nanoparticles on Hysteresis Effect and Ion Migration Kinetics in Perovskite Solar Cells

YU Man1(), GAO Rongyao2, QIN Yujun2, AI Xicheng2()   

  1. 1. School of Materials Engineering, Xi'an Aeronautical Institute, Xi’an 710077, China
    2. Department of Chemistry, Renmin University of China, Beijing 100872, China
  • Received:2023-09-18 Revised:2023-11-29 Published:2024-04-20 Online:2023-12-19
  • Contact: AI Xicheng, professor. E-mail: xcai@ruc.edu.cn
  • About author:YU Man (1989-), female, PhD. E-mail: yuman@xaau.edu.cn
  • Supported by:
    National Natural Science Foundation of China(21903062);National Natural Science Foundation of China(21973112);Young Talent Fund of Association for Science and Technology in Shaanxi, China(20220462);National College Students' Innovation and Entrepreneurship Training Program(202311736016)

摘要:

迟滞效应是影响钙钛矿太阳能电池性能和稳定性的重要问题, 离子迁移和由此产生的界面离子积累是引起迟滞效应最重要的原因之一。本研究采用上转换发光纳米材料(Upconversion Luminescent Nanoparticles, UCNP)修饰电子传输层/钙钛矿活性层的界面及本征钙钛矿活性层, 系统探究了UCNP对钙钛矿的形貌、结构、光谱/光电性能和离子迁移动力学的影响。结果表明: 钙钛矿活性层经过UCNP修饰后器件的光电转换效率(Power Conversion Efficiency, PCE)最佳(16.27%), 而且迟滞因子(Hysteresis Factor, HF)得到显著改善(0.05)。进一步采用回路切换瞬态光电技术系统探究了钙钛矿太阳能电池不受光生载流子干扰的离子迁移动力学过程, 证明UCNP在光电转换过程中起到抑制离子累积和迁移的双重作用: 一方面UCNP可以形成阻隔层, 阻碍离子累积; 另一方面, UCNP可以在退火过程中进入到钙钛矿体相晶界处, 阻碍离子迁移, 使恢复电压从0.43 V降低到0.28 V。极化诱导缺陷态模型解释了离子-载流子相互作用机制, 阐释了UCNP抑制钙钛矿光伏器件迟滞效应的机理。本研究可以为调控钙钛矿太阳能电池迟滞提供一种有效的解决方案。

关键词: 上转换发光纳米材料, 钙钛矿太阳能电池, 迟滞效应, 离子迁移

Abstract:

Hysteresis effect greatly impacted performance and stability of perovskite solar cells. Ion migration and the resulting accumulation of interface ions were widely recognized as the most important origins. In this study, upconversion luminescent nanoparticles (UCNP) were used to modify the interface of the electron transport layer/perovskite active layer and the intrinsic perovskite active layer, and the effects of UCNP on the morphology, structure, spectral/optoelectronic properties, and ion migration kinetics of perovskite were systematically explored. The results indicated that the device with UCNP modified perovskite active layer has the best photoelectric conversion efficiency (PCE, 16.27%) and significantly improves the hysteresis factor (HF, 0.05). Furthermore, circuit switching transient optoelectronic technology was employed to investigate the ion migration kinetics without interference from photo-generated carriers, revealing the dual role of UCNP in suppressing ion migration and accumulation during the optoelectronic conversion process of perovskite solar cells. On the one hand, UCNP formed barrier layers that hinder ion accumulation. On the other hand, UCNP infiltrated into grain boundaries of perovskite phase during annealing, hindering ion migration and reducing the recovery voltage from 0.43 V to 0.28 V. The mechanism of carriers and ions interaction was explained based on the polarization-induced trap state model to declare the process of UCNP suppressing the hysteresis of perovskite photovoltaic devices. This work provides effective solution for regulating the hysteresis of perovskite solar cells.

Key words: upconversion luminescent nanoparticles, perovskite solar cell, hysteresis effect, ion migration

中图分类号: