[1] |
LEARY A M, OHODNICKI P R, MCHENRY M E. Soft magnetic materials in high-frequency, high-power conversion applications. The journal of The Minerals, Metals & Materials Society, 2012, 64(7): 772-781.
|
[2] |
SUNDAY K J, TAHERI M L. Soft magnetic composites: recent advancements in the technology. Metal Powder Report, 2017, 72(6): 425-429.
DOI
URL
|
[3] |
SHOKROLLAHI H, JANGHORBAN K. Soft magnetic composite materials (SMCs). Journal of Materials Processing Technology, 2007, 189(1/2/3): 1-12.
DOI
URL
|
[4] |
OHODNICKI P, EGBU J, YU Y, et al. Surface oxidation and crystallization of FeNi-based soft magnetic nanocrystalline and amorphous nanocomposite alloys. Journal of Alloys and Compounds, 2020, 834(15): 155038.
DOI
URL
|
[5] |
SUN K, FENG S, JIANG Q, et al. Intergranular insulating reduced iron powder-carbonyl iron powder/SiO2-Al2O3 soft magnetic composites with high saturation magnetic flux density and low core loss. Journal of Magnetism and Magnetic Materials, 2020, 493: 165705.
DOI
URL
|
[6] |
YAGHTIN M, TAGHVAEI A H, HASHEMI B, et al. Effect of heat treatment on magnetic properties of iron-based soft magnetic composites with Al2O3 insulation coating produced by Sol-Gel method. Journal of Alloys and Compounds, 2013, 581: 293-297.
DOI
URL
|
[7] |
WANG C, GUO Z, WANG J, et al. Industry-oriented Fe-based amorphous soft magnetic composites with SiO2-coated layer by one-pot high-efficient synthesis method. Journal of Magnetism and Magnetic Materials, 2020, 509: 166924.
DOI
URL
|
[8] |
WANG J, FAN X A, WU Z, et al. Intergranular insulated Fe/SiO2 soft magnetic composite for decreased core loss. Advanced Powder Technology, 2016, 27: 1189-1194.
DOI
URL
|
[9] |
LI W, CAI H, KANG Y, et al. High permeability and low loss bioinspired soft magnetic composites with nacre-like structure for high frequency applications. Acta Materialia, 2019, 167: 267-274.
DOI
URL
|
[10] |
ZHOU B, DONG Y, LIU L, et al. Enhanced soft magnetic properties of the Fe-based amorphous powder cores with novel TiO2 insulation coating layer. Journal of Magnetism and Magnetic Materials, 2019, 474: 1-8.
DOI
URL
|
[11] |
XING W, YOU B, WU L. The microstructure and anticorrosion performance of phytic acid-catalyzed polysilsesquioxane coatings. Journal of Sol-Gel Science and Technology, 2007, 42(2): 187-195.
DOI
URL
|
[12] |
WAN J J, WAN J Q, MA Y W, et al. Reactivity characteristics of SiO2-coated zero-valent iron nanoparticles for 2,4-dichlorophenol degradation. Chemical Engineering Journal, 2013, 221: 300-307.
DOI
URL
|
[13] |
ARAMAKI K, SHIMURA T. Protection of passivated iron against corrosion in a 0.1 mol/L NaNO3 solution by coverage with an ultrathin polymer coating of carboxylate SAM. Corrosion Science, 2009, 51(9): 1887-1893.
DOI
URL
|
[14] |
TIMPEL M, NARDI M, KRAUSE S, et al. Surface modification of ZnO (0001)-Zn with phosphonate-based self-assembled monolayers: binding modes, orientation, and work function. Chemistry of Materials, 2014, 26(17): 5042-5050.
DOI
URL
|
[15] |
GAO X, LU K, XU L, et al. Excellent anti-corrosive pretreatment layer on iron substrate based on three-dimensional porous phytic acid/silane hybrid. Nanoscale, 2016, 8(3): 1555-1564.
DOI
URL
|
[16] |
SHUBHA H N, VENKATESHA T V, VATHSALA K, et al. Preparation of self assembled sodium oleate monolayer on mild steel and its corrosion inhibition behavior in saline water. ACS Applied Materials & Interfaces, 2013, 5(21): 10738-10744.
|
[17] |
GAO X, LI W, MA H. Effect of anti-corrosive performance, roughness and chemical composition of pre-treatment layer on the overall performance of the paint system on cold-rolled steel. Surface & Coatings Technology, 2017, 329: 19-28.
DOI
URL
|
[18] |
LEE M S, JO N J. Coating of methyltriethoxysilane-modified colloidal silica on polymer substrates for abrasion resistance. Journal of Sol-Gel Science and Technology, 2002, 24(2): 175-180.
DOI
URL
|