浸渍相转化法制备陶瓷中空纤维膜的研究进展

doi:10.3724/SP.J.1077.2012.11689

摘要/Abstract

摘要： 浸渍相转化法可以制备非对称结构的陶瓷中空纤维膜. 本文讨论了陶瓷中空纤维膜的发展情况, 并着重探讨了各因素对膜孔结构的影响. 大量陶瓷粉体存在情况下的相转化机理, 孔结构与力学强度的平衡问题, 是目前需要重点关注的两个问题. 有效调节孔结构, 保证其力学性能可以实现陶瓷中空纤维膜在分离和纯化、固体氧化物燃料电池、膜催化器和膜反应器等方面的广泛应用.

关键词: 浸渍相转化法, 陶瓷, 中空纤维膜, 综述

Abstract: Ceramic hollow fiber membranes (CHFM) with an asymmetric structure can be fabricated by the method nonsolvent induced phase separation (NIPS). The paper reviews the progress and tendency of the ceramic hollow fiber membranes using NIPS technic, especially on the influence of factors on the structure of hollow membranes. The discussion on the mechanism of phase inversion in the systems containing much ceramic powders, with the balance between porous structure and mechanical strength, are two important issues of requiring concern. Through structure’s controlled effectively and mechanical strength preserved, hollow fiber membranes can be widely applied in the fields of separation and purification, solid oxide fuel cell (SOFC), membrane contactors and reactors.

Key words: nonsolvent induced phase separation, ceramic, hollow fiber membranes, review

中图分类号:

TQ028

刘朋超, 马敬红, 杨曙光, 龚静华, 徐坚. 浸渍相转化法制备陶瓷中空纤维膜的研究进展[J]. 无机材料学报, 2012, 27(7): 673-679.

LIU Peng-Chao, MA Jing-Hong, YANG Shu-Guang, GONG Jing-Hua, XU Jian. Research Progress on the Preparation of Ceramic Hollow Fiber Membranes by Nonsolvent Induced Phase Separation[J]. Journal of Inorganic Materials, 2012, 27(7): 673-679.

参考文献

[1] 杨座国, 膜科学技术过程与原理. 上海: 华东理工大学出版社, 2009: 1.

[2] Li K, Tan X Y, Liu S M. Preparation and characterization of inorganic hollow fiber membranes. J. Membr. Sci., 2001, 188(1): 87-95.

[3] Hsieh H P. Inorganic membrane reactors - a review. Membr. Rea. Tech., 1989, 85: 53-67.

[4] Saracco G, Versteeg G F, Vanswaaij W P M. Current hurdles to the success of high-temperature membrane reactors. J. Membr. Sci., 1994, 95(2): 105-123.

[5] Wei C C, Chen O Y, Liu Y, et al. Ceramic asymmetric hollow fibre membranes-one step fabrication process. J. Membr. Sci., 2008, 320(1/2): 191-197.

[6] Armor J N. Applications of catalytic inorganic membrane reactors to refinery products. J. Membr. Sci., 1998, 147(2): 217-233.

[7] Hoek E M V, Guillen G R, Pan Y J, et al. Preparation and characterization of membranes formed by nonsolvent induced phase separation: a review. Ind. Eng. Che. Res., 2011, 50(7): 3798-3817.

[8] Xu J H, Yao J F, Zeng C F, et al. Preparation of binderless honeycomb silicalite-1 monolith by using bundled palm fibers as template. J. Porous Mater., 2010, 17(3): 329-334.

[9] Li J, Qi H Y, Shi Y P. Applications of titania and zirconia hollow fibers in sorptive microextraction of N,N-dimethylacetamide from water sample. Anal. Chim. Acta, 2009, 651(2): 182-187.

[10] Xu L, Lee H K. Zirconia hollow fiber: preparation, characterization, and microextraction application. Anal. Chem., 2007, 79(14): 5241-5248.

[11] Liu W W, Zeng C F, Zhang L X, et al. Facile and versatile preparation of silicalite-1 hollow structures using cotton threads as templates. Mater. Chem. Phys., 2007, 103(2/3): 508-514.

[12] Yuan R S, Fu X Z, Wang X C, et al. Template synthesis of hollow metal oxide fibers with hierarchical architecture. Chem. Mater., 2006, 18(19): 4700-4705.

[13] Lu H Q, Zhang L X, Xing W H, et al. Preparation of TiO2 hollow fibers using poly(vinylidene fluoride) hollow fiber microfiltration membrane as a template. Mater. Chem. Phys., 2005, 94(2/3): 322-327.

[14] Sigmund W, Yuh J, Park H, et al. Processing and structure relationships in electrospinning of ceramic fiber systems. J. Am. Ceram. Soc., 2006, 89(2): 395-407.

[15] Zhang Y F, Li J Y, Li Q, et al. Preparation of CeO2-ZrO2 ceramic fibers by electrospinning. J. Colloid Interface Sci., 2007, 307(2): 567-571.

[16] Maneeratana V, Sigmund W M. Continuous hollow alumina gel fibers by direct electrospinning of an alkoxide-based precursor. Chem. Eng. J., 2008, 137(1): 137-143.

[17] Sun Y, Li J Y, Tan Y, et al. Fabrication of aluminum nitride (AlN) hollow fibers by carbothermal reduction and nitridation of electrospun precursor fibers. J. Alloys Compd., 2009, 471(1/2): 400-403.

[18] Zeman L, Fraser T. Formation of air-cast cellulose-acetate membranes. 1. Study of macrovoid formation. J. Membr. Sci., 1993, 84(1/2): 93-106.

[19] Zeman L, Fraser T. Formation of air-cast cellulose-acetate membranes.2. Kinetics of demixing and microvoid growth. J. Membr. Sci., 1994, 87(3): 267-279.

[20] Lloyd D R, Kim S S, Kinzer K E. Microporous membrane formation via thermally-induced phase-separation. 2. Liquid liquid-phase separation. J. Membr. Sci., 1991, 64(1/2): 1-11.

[21] Lloyd D R, Kinzer K E, Tseng H S. Microporous membrane formation via thermally induced phase-separation. 1. Solid liquid-phase separation. J. Membr. Sci., 1990, 52(3): 239-261.

[22] Kang Y S, Kim H J, Kim U Y. Asymmetric membrane formation via immersion precipitation method. 1. Kinetic effect. J. Membr. Sci., 1991, 60(2/3): 219-232.

[23] Radovanovic P, Thiel S W, Hwang S T. Formation of asymmetric polysulfone membranes by immersion precipitation. 1. Modeling mass-transport during gelation. J. Membr. Sci., 1992, 65(3): 213-229.

[24] Radovanovic P, Thiel S W, Hwang S T. Formation of asymmetric polysulfone membranes by immersion precipitation. 2. The effects of casting solution and gelation bath compositions on membrane- structure and skin formation. J. Membr. Sci., 1992, 65(3): 231-246.

[25] Loeb S, Sourirajan S. High Flow Porous Membranes for Separating Water from Saline Solutions. United States, US3133132. 1964.

[26] Lee K H, Kim Y M. Asymmetric hollow inorganic membranes. Key Eng. Mater., 1991, 61: 17-22.

[27] Deshmukh S P, Li K. Effect of ethanol composition in water coagulation bath on morphology of PVDF hollow fibre membranes. J. Membr. Sci., 1998, 150(1): 75-85.

[28] 左丹英. 溶液相转化法制备PVDF微孔膜过程中的结构控制及其性能研究. 杭州: 浙江大学博士论文, 2005.

[29] Strathmann H, Kock K. The formation mechanism of phase inversion membranes. Desalination, 1977, 21(3): 241-255.

[30] Husain S, Koros W J. Macrovoids in hybrid organic/inorganic hollow fiber membranes. Ind. Eng. Chem. Res., 2009, 48(5): 2372-2379.

[31] Smolders C A, Reuvers A J, Boom R M, et al. Microstructures in phase-inversion membranes.1. Formation of macrovoids. J. Membr. Sci., 1992, 73(2/3): 259-275.

[32] Cohen C, Tanny G B, Prager S D. Diuffsion-controlled formation of Porous structures in ternary polymer systems. J. Polym. Sci.: Polym. Phys. Ed, 1979, 17(3): 477-489.

[33] Tsay C S, Mchugh A J. Mass-transfer modeling of asymmetric membrane formation by phase inversion. J. Polym. Sci., Part B: Polym. Phys., 1990, 28(8): 1327-1365.

[34] Wara N M, Francis L F, Velamakanni B V. Addition of alumina to cellulose acetate membranes. J. Membr. Sci., 1995, 104(1/2): 43-49.

[35] Li K, Tan X Y, Liu Y T. Single-step fabrication of ceramic hollow fibers for oxygen permeation. J. Membr. Sci., 2006, 272(1/2): 1-5.

[36] Dobo E J. Process to Produce Inorganic Hollow Fibers. 1980.

[37] Hatim M D, Tan X Y, Wu Z T, et al. Pd/Al2O3 composite hollow fibre membranes: effect of substrate resistances on H2 permeation properties. Chem. Eng. Sci., 2011, 66(6): 1150-1158.

[38] Li K, Kingsbury B F K. A morphological study of ceramic hollow fibre membranes. J. Membr. Sci., 2009, 328(1/2): 134-140.

[39] Tan X Y, Li K. Oxygen production using dense ceramic hollow fiber membrane modules with different operating modes. AiChE J., 2007, 53(4): 838-845.

[40] Liu S M, Li K, Hughes R. Preparation of porous aluminium oxide (Al2O3) hollow fibre membranes by a combined phase-inversion and sintering method. Ceram. Int., 2003, 29(8): 875-881.

[41] Koonaphaptleelert S, Li K. Preparation and characterization of hydrophobic ceramic hollow fibre membrane. J. Membr. Sci., 2007, 291(1/2): 70-76.

[42] Tan X Y, Liu N, Meng B, et al. Honeycomb-structured perovskite hollow fibre membranes with ultra-thin densified layer for oxygen separation. Sep. Purif. Technol., 2011, 80(2): 396-401.

[43] Tan X Y, Wang Z G, Li K. Effects of sintering on the properties of La0.6Sr0.4Co0.2Fe0.8O3–δ perovskite hollow fiber membranes. Ind. Eng. Chem. Res., 2010, 49(6): 2895-2901.

[44] Li K, Wang B, Zydorczak B, et al. Stabilities of La0.6Sr0.4Co0.2Fe0.8O3–δ oxygen separation membranes-effects of kinetic demixing/decomposition and impurity segregation. J. Membr. Sci., 2009, 344(1/2): 101-106.

[45] Li K, Zydorczak B, Wu Z T. Fabrication of ultrathin La0.6Sr0.4Co0.2Fe0.8O3–δ hollow fibre membranes for oxygen permeation. Chem. Eng. Sci., 2009, 64(21): 4383-4388.

[46] Pan X L, Stroh N, Brunner H, et al. Pd/ceramic hollow fibers for H2 separation. Sep. Purif. Technol., 2003, 32(1/2/3): 265-270.

[47] Sun G B, Hidajat K, Kawi S. Ultra thin Pd membrane on α-Al2O3 hollow fiber by electroless plating: high permeance and selectivity. J. Membr. Sci., 2006, 284(1/2): 110-119.

[48] Wang W P, Thomas S, Zhang X L, et al. H2/N2 gaseous mixture separation in dense pd/alpha-Al2O3 hollow fiber membranes: experimental a