高级检索
无机材料学报

无机材料学报

• 研究论文 • 上一篇    下一篇

As2Se3-AsTe-CuI系统玻璃的形成和结构研究

陈玮; 程继健   

  1. 华东理工大学无机材料研究所; 上海 200237
  • 收稿日期:1998-01-13 修回日期:1998-02-19 出版日期:1999-02-20 网络出版日期:1999-02-20

Formation and Structure of Chalcohalide Glasses in the As2Se3-AsTe-CuI System

CHEN Wei; CHENG Ji-Jian   

  1. Research Institute of Inorganic MaterialS; ECUST Shanghai 200257 China
  • Received:1998-01-13 Revised:1998-02-19 Published:1999-02-20 Online:1999-02-20

PDF (PC)

905

摘要： 为了探索新的透红外材料，本文研究了As2
Se3－AsTe－CuI系统玻璃的形成区，制备了一系列不同ASTe和CuI含量的玻璃．研究表明：该系统玻璃的形成范围相当大，AS2Se3－ASTe二元系统可以任何比例形成玻璃，AS2Se3－CuI和AsTe-CuI二元系统，当CSI含量分别达70和40mol％时，仍可形成稳定的玻璃，直径在20mm厚度在50mm以上的玻璃样品很容易得到．研究了部分玻璃样品的远红外光谱，结果表明：该系统玻璃的结构单元主要是：［AS（SeTe）3-xIx］（x＝0～3）、［As2Te4］和［CuI4］，随玻璃的成分不同，这些结构单元的相对比例也不同，根据研究结果提出了该系统玻璃的结构模型．

关键词: 硫系卤化物玻璃, 玻璃形成, 玻璃结构, 红外透射材料

Abstract: The aim of this study was to produce an infrared transmitting material with multiphonon absorption edge longer than 20μm.
For this purpose, chalcohalide glasses based on As2Se3-AsTe-CuI system were studied. The glass forming region was obtained and
homogeneous glass prepared. Binary system glass may be formed by combining As2Se3 with AsTe in any proportion, the maximum content
of CuI in As2Se3 is up to 70 mol% and that of CuI in AsTe about 45 mol%. These glasses have a good glass forming ability and it is easy
to obtain the samples of diameter about 20mm and thickness over 50mm. The far infrared spectra of the glasses were investigated. The results
demonstrate that basic structural units are [As(SeTe)3-xIx(x=0～3), As2Te4] and [CuI_4], their proportions depend on the
composition of the glasses. With the help of experimental results and theoretical analysis, a structural model of glasses was suggested.

Key words: chalcohalide glass, glass forming, glass structure, infrared transmitting materials

中图分类号: