无机材料学报

• 研究论文 • 上一篇    下一篇

H2+H2O还原法制备超细金属磁记录粉

王其祥; 宋宝珍; 李洪钟   

  1. 中国科学院化工冶金研究所 北京 100080
  • 收稿日期:2000-08-18 修回日期:2000-10-30 出版日期:2001-09-20 网络出版日期:2001-09-20

Ultrafine Metal Magnetic Recording Powders Produced by the H2+H2O Reduction Process

WANG Qi-Xiang; SONG Bao-Zhen; LI Hong-Zhong   

  1. Instittue of Chemical Metallurgy; Chinese Academy of Science; Beijing 100080; China
  • Received:2000-08-18 Revised:2000-10-30 Published:2001-09-20 Online:2001-09-20

摘要: 采用H+HO还原法,通过控制HO/H比可改善粉体晶粒链状结构的晶间界面结构,采用XRD、TEM、VSM等方法测试粉体的晶体结构、粒子形貌和磁性能.结果为金属磁粉的矫顽力提高;粒子形状均匀,表面平滑,毛刺少;460℃时H+HO还原金属磁粉的矫顽力为1520Oe,比传统氢还原工艺矫顽力1440Oe提高5.6%.采用流化床反应器,具有温度均匀,气固接触充分,可防止颗粒烧结等优点,工业应用前景广阔.

关键词: 金属磁记录粉, H2/H2O还原, 晶粒链状结构

Abstract: metal magnetic recording powders was prepared in fluidized bed reactor. The results of characterizing with XRD, TEM, VSM etc show that the coercivity of metal powders can be improved by
the H2+H2O reduction process. At 460℃ the coercivity of the metal powders is 1520Oe, being 5.6% higher than that of the metal
powder produced by the traditional H2 reduction process. The fluidized bed reactor is suitable for this process of industry production. It has a number of
advantages such as uniform reaction temperature, good gas-solids contacting, and freedom from sintering of the particles.

Key words: metal magnetic recording powders;α-Fe;H2+H2O reduction process

中图分类号: