用有机硅聚合物制备高温结构陶瓷材料研究进展

无机材料学报

用有机硅聚合物制备高温结构陶瓷材料研究进展

彭志坚¹; 司文捷¹; 林仕伟¹; 苗赫濯¹; AN Li-Nan²

1. 清华大学新型陶瓷与精细工艺国家重点实验室, 北京 100084; Department　of Mechanical　Engineering; University of olorado; Boulder CO 80309-427, U.S.A.

收稿日期:2000-09-04 修回日期:2000-10-20 出版日期:2001-09-20 网络出版日期:2001-09-20

Advances of Ultrahigh Temperature Ceramics Derived from Organosilicon-Polymer

PENG Zhi-Jian¹; SI Wen-Jie¹; LIN Shi-Wei¹; MIAO He-Zhuo¹; AN Li-Nan²

1. State Key Laboratory of New Ceramics and Fine Processing; Tsinghua University; Beijing; 100084 China; 2. Department of Mechanical Engineering; University of Colorado; Boulder; CO 80309-427; U.S.A

Received:2000-09-04 Revised:2000-10-20 Published:2001-09-20 Online:2001-09-20

摘要/Abstract

摘要： 回顾了用有机硅聚合物制备陶瓷历史，综述了工艺及材料性能，其中碳化硅、氮化硅等纤维，碳化硅、氮化硅、二氧化硅等薄膜已进入实用阶段；重点介绍了在高温１４００～２０００℃下长期稳定存在的块体材料研究进展和趋势．

关键词: 有机硅聚合物, 前驱体, 陶瓷, 复合材料

Abstract: This paper reviewed the history of ultrahigh-temperature structural ceramics derived from organosilicon-polymer. The advances of processes and material properties were included. The fibers of SiC, Si₃N₄ and the films of SiC, SiO₂, Si₃N₄ were industrialized. Some materials which could be used at 2000℃ were discovered. The development trends were proposed

Key words: organosilicon-polymer, preceramics, polymer-derived-ceramics, composites

中图分类号:

TQ174

彭志坚,司文捷,林仕伟,苗赫濯,AN Li-Nan. 用有机硅聚合物制备高温结构陶瓷材料研究进展[J]. 无机材料学报.

PENG Zhi-Jian,SI Wen-Jie,LIN Shi-Wei,MIAO He-Zhuo,AN Li-Nan. Advances of Ultrahigh Temperature Ceramics Derived from Organosilicon-Polymer[J]. Journal of Inorganic Materials.

参考文献

[1] Rishi Raj. J. Am. Ceram. Soc., 1993, 76 (9): 2147--2174.
[2] Komeya K, Matsui M. Mater. Sci. and Tech., 1994, 11: 517--565.
[3] 傅恒志(FU Heng-Zhi). 航空材料学报(Journal of Aeronautical Materials)，1998, 18 (4): 52--61.
[4] Nampshire S. Mater. Sci. and Tech., 1994, 11: 119--171.
[5] Johnson D Ray, Stiegler James O. Adv. Mater. & Proc., 1990, 9: 55--56,59--61.
[6] Popper P. Brit. Res. Assn., 1967, 57: 1.
[7] Verbeek W, Winter G. German Patent 2236078, 1974.
[8] Verbeek W, Winter G, Mansmann M. German Patent 2243527, 1974.
[9] Yajima S S, Hayashi J, Omori M, et al. Nature, 1976, 261: 683.
[10] Yajima S S, Okamura K, Hayashi J, et al. J. Am. Ceram. Soc., 1976, 59: 324.
[11] Kleebe H J. phys. stat. sol. (A), 1998, 166: 297--313.
[12] Ralf Riedel, Andreas Kienzle, Wolfgang Dressler, et al. Nature, 1996, 382: 796--798.
[13] Baldus H P, Jansen M, Sporn D. Science, 1999, 285: 699--703.
[14] 龙剑峰，有机硅材料及应用，1999 6: 23--26.
[15] Song Y C, Zhao Y, Feng C X, et al. J. of Mater. Sci., 1994, 29: 5745--5756.
[16] Yajima S S, Hayashi J, Omori M. Chem. Lett., 1975, 931.
[17] Legrow G E, Lim T F, Lipowitz J, et al. Am. Ceram. Soc. Bull., 1987, 66: 363.
[18] Baldus H P, Jansen M, Wagner O. Key Eng. Mater., 1994, 89--91: 75--80.
[19] Okamura K, Sato M, Hasegawa Y, et al. ibid, 1984, 2059.
[20] Funayama O, Nakahara H, Tezuka T, et al. J. of Mater. Sci., 1994, 29: 2238--2244.
[21] 彭志坚，四川大学硕士论文，1996.
[22] Delverdier O, Monthioux M. J. of the Eur. Ceram. Soc., 1996, 16: 721--737.
[23] Kakimoto K, Wakai F, Bill J, et al. J. Am. Ceram. Soc., 1999, 82 (9): 2337--2341.
[24] An Linan, Zhang W, Bright V B, et al. IEEE The 13^th Annual International Conference on Microelectromechanical Systems (MEMS-2000),
Miyazaki, Japan, January 2000, 23--27: 619--623.
[25] 李永清，陈朝辉，张长瑞, 等(LI Yong-Qing, et al). 宇航?材料工艺(Aerospace Materials & Technology)，1996, 6: 1--6?，9.
[26] 顾培芷，张伟儒，李勇, 等(GU Pei-Zhi, et al). 硅酸盐学报(Journal of the Chinese Ceramic Society)，1995 23 (6): 266--271.
[27] Sternitzke M, Derby B, Brook R J. J. Am. Ceram. Soc., 1998, 81 (1): 41--48.
[28] Lee J I, Hetcht N L, Taill M. J. Am. Ceram. Soc., 1998, 81 (2): 421--424.
[29] Kleebe H J, Motz G, Ziegler G. Key Eng. Mater., 1999, 175--176: 57--68.
[30] Kleebe H J, Wolfgang Braue, et al. J. of the Eur. Ceram. Soc., 1996, 16 (3): 339--351.
[31] Ralf Riedel, Kleebe H J, Herbert Schonfelder, et al. Nature, 1992, 374: 526--528.
[32] Ralf Riedel, Passing G, Herbert Schonfelder, et al. Nature, 1992, 355: 714--717.
[33] Ziegler G, Kleebe H J, Motz G, et al. Mater. Chem. and Phys., 1999, 61: 55--63.
[34] M$\ddot{ u$ller H, Kleebe H J, Suttor D, et al. Key Eng. Mater., 1997, 132--136: 2005--2008.
[35] Greil P, Scibold M. J. Mater. Sci., 1992, 27: 1053--1060.
[36] Lightfoot A, Haggerty J S, Rhine W E. Cer. Eng. Sci. Proc., 1995, 16 (5): 653--661.
[37] Schwartz K B, Rowcliffe D J. J. Am. Ceram. Soc., 1986, 69 (5): C106--108.
[38] Michael Seibold, Peter Greil. J. of the Eur. Ceram. Soc., 1993, 11: 105--113.
[39] Hahn B, Walter S, et al. Coll. and Surf. A: Physicochem. and Eng. Aspects, 1996, 115: 291--295.
[40] Peter Greil. Key Eng. Mater., 1997, 132--136: 1981--1984.
[41] 谢征芳，陈朝辉，李永清，等(XIE Zheng-Fang, et al). 无机材料学报(Journal of Inorganic Materials)，2000 15 (4): 200--208.
[42] Annette Kaindl, Wolfgang Lehner, Peter Greil, et al. Key Eng. Mater., 1997, 132--136: 1985--1988.
[43] Peter Greil. J. of the Eur. Ceram. Soc., 1998, 18: 1905--1914.
[44] Peter Greil. Key Eng. Mater., 1999, 159--160: 339--346.
[45] Duran A, Aparicio M, Rebstock K, et al. Key Eng. Mater., 1997, 127--131: 287--294.
[46] Jones R, Szweda A, Petrak D. Composites:A, 1999, 30: 569--575.
[47] 曹英斌，张长瑞, 等(CAO Ying-Bin, et al). 宇航材料工艺(Aerospace Materials & Technology)，1999, (5): 10--14.
[48] He Xin-Bo, Zhang Xin-Min, Zhang Chang-Rui, et al. Mater. Sci.and Eng., 2000, A284: 211--218.
[49] Eddy Vanswijgenhoven, John Holmes, et al. Scipta Materilia, 1998, 38 (12): 1781--1788.
[50] Nikhilesh Chawla, Yahya K Tur, John W Holmes, et al. J. Am. Ceram. Soc., 1998, 81 (5): 1221--1230.
[51] Liew Li-Anne, Zhang Wenge, Bright Victor M., et al. Sensors and Actuators, A: Physical, 2001, 89: 64--70.