• 研究快报 • 上一篇
辛洪川,汤建庭,范峰滔,杨启华,李灿
收稿日期:
2009-06-29
修回日期:
2009-08-19
出版日期:
2010-01-20
网络出版日期:
2010-01-24
XIN Hong-Chuan, TANG Jian-Ting, FAN Feng-Tao, YANG Qi-Hua, LI Can
Received:
2009-06-29
Revised:
2009-08-19
Published:
2010-01-20
Online:
2010-01-24
摘要: 使用P123作为模板剂,采用不同的硅源(正硅酸甲酯,正硅酸乙酯,硅酸钠)在弱酸性的条件下(pH = 4.4, 乙酸-乙酸钠缓冲溶液)合成掺杂铁的介孔氧化硅材料。正硅酸甲酯和硅酸钠形成有序的二维六方相的介孔结构,而正硅酸乙酯形成了囊泡结构。紫外可见漫反射光谱和紫外共振拉曼光谱表明,在环境友好的条件下,采用硝酸铁和硅酸钠可以合成出高度隔离的铁物种。缓冲溶液提供了一条便捷的途径,通过简单改变硅源来控制介孔结构。掺杂铁的介孔氧化硅材料在苯酚的羟化反应中表现出优异的催化性能,主要由于铁物种高度分散在氧化硅载体上,介孔结构使铁活性位更易于接近反应物分子。
中图分类号:
辛洪川,汤建庭,范峰滔,杨启华,李灿. 缓冲溶液中制备掺杂高度隔离铁物种的介孔氧化硅[J]. 无机材料学报, DOI: 10.3724/sp.j.1077.2009.09455.
XIN Hong-Chuan,TANG Jian-Ting,FAN Feng-Tao,YANG Qi-Hua,LI Can. Preparation of Fe-substituted Mesoporous Silicas with Highly Isolated Iron Species in Buffer Solution[J]. Journal of Inorganic Materials, DOI: 10.3724/sp.j.1077.2009.09455.
[1]Wang Y. Res. Chem. Intermediat., 2006, 32(3-4): 235-251. [2]Li Y, Feng, Z C, van Santen R A, et al. J. Catal., 2008, 255(2): 190-196. [3]Xin H C, Yang Q H. Petrochem. Tech., 2006, 35(11): 1017-1024. [4]Yuan Z Y, Liu S Q, Chen T H, et al. J. Chem. Soc.-Chem. Commun., 1995, 9: 973-974. [5]Li Y, Feng Z C, Lian Y X, et al. Micropor. Mesopor. Mater., 2005, 84(1-3): 41-49. [6]Li Y, Feng Z C, Xin H C, et al. J. Phys. Chem. B, 2006, 110(51): 26114-26121. [7]Han Y, Meng X J, Guan H B, et al. Micropor. Mesopor. Mater., 2003, 57(2): 191-198. [8]Tuel A, Arcon I, Millet J M M. J. Chem. Soc.-Faraday Trans., 1998, 94(23): 3501-3510. [9]Xin H C, Liu J, Fan F T, et al. Micropor. Mesopor. Mater., 2008, 113(1-3): 231-239. [10]Tang J T, Liu J, Yang J, et al. J. Colloid Interf. Sci., 2009, 335(2): 203-209. [11]Liu J, Yang Q H, Zhang L, et al. Adv. Funct. Mater., 2007, 17(4): 569-576. [12]Mohapatra S K, Sahoo B, Keune W, et al. Chem. Commun., 2002, 14: 1466-1467. [13]Li Y, Xia H A, Fan F T, et al. Chem. Commun., 2008, 6: 774-776. [14]Li C. J. Catal., 2003, 216(1-2): 203-212. [15]Li C. Stud. Surf. Sci. Catal., 2007, 170: 561-576. [16]Xiong G, Li C, Li H Y, et al. Chem. Commun., 2000, 8: 677-678. [17]Zhao D Y, Huo Q S, Feng J L, et al. J. Am. Chem. Soc., 1998, 120(24): 6024-6036. [18]Choi J S, Yoon S S, Jang S H, et al. Catal. Today, 2006, 111(3-4): 280-287. |
[1] | 顾薛苏, 殷杰, 王康龙, 崔崇, 梅辉, 陈忠明, 刘学建, 黄政仁. 颗粒级配对黏结剂喷射打印碳化硅陶瓷性能的影响[J]. 无机材料学报, 0, (): 216-. |
[2] | 陈雨, 林埔安, 蔡冰, 张文华. 钙钛矿太阳能电池无机空穴传输材料的研究进展[J]. 无机材料学报, 0, (): 105-. |
[3] | 田煜彬, 田超凡, 李森, 赵永鑫, 邢涛, 李智, 陈萧如, 向帅蓉, 代鹏程. 高导电性生物质碳布的制备及其燃料电池气体扩散层性能[J]. 无机材料学报, 0, (): 127-. |
[4] | 江润璐, 吴鑫, 郭昊骋, 郑琦, 王连军, 江莞. UiO-67基导电复合材料的制备及其热电性能研究[J]. 无机材料学报, 0, (): 197-. |
[5] | 李海燕, 旷峰华, 吴昊龙, 刘小根, 包亦望, 万德田. 残余拉应力的温度依赖性及其对裂纹扩展行为的影响[J]. 无机材料学报, 0, (): 214-. |
[6] | 方万丽, 沈黎丽, 李海燕, 陈薪羽, 陈宗琦, 寿春晖, 赵斌, 杨松旺. NiOx介孔层的成膜过程对碳电极钙钛矿太阳能电池性能的影响[J]. 无机材料学报, 0, (): 2-. |
[7] | 丁统顺, 丰平, 孙学文, 单沪生, 李琪, 宋健. Fmoc-FF-OH钝化钙钛矿薄膜及其太阳能电池性能研究[J]. 无机材料学报, 0, (): 50-. |
[8] | 徐昊, 钱伟, 花银群, 叶云霞, 戴峰泽, 蔡杰. 皮秒激光加工的微织构对碳化硅润湿性的影响[J]. 无机材料学报, 0, (): 73-. |
[9] | 邱海洋, 苗广潭, 李辉, 栾奇, 刘国侠, 单福凯. 等离子体处理对突触晶体管长程塑性的影响[J]. 无机材料学报, 2023, 38(4): 406-412. |
[10] | 杜剑宇, 葛琛. 光电人工突触研究进展[J]. 无机材料学报, 2023, 38(4): 378-386. |
[11] | 杨洋, 崔航源, 祝影, 万昌锦, 万青. 柔性神经形态晶体管研究进展[J]. 无机材料学报, 2023, 38(4): 367-377. |
[12] | 吴俊林, 丁继扬, 黄新友, 朱丹阳, 黄东, 代正发, 杨文钦, 蒋兴奋, 周健荣, 孙志嘉, 李江. Gd2O2S:Tb闪烁陶瓷的制备与结构: 水浴合成中H2SO4/Gd2O3摩尔比的影响[J]. 无机材料学报, 2023, 38(4): 452-460. |
[13] | 陈鑫力, 李岩, 王伟胜, 石智文, 竺立强. 明胶/羧化壳聚糖栅控氧化物神经形态晶体管[J]. 无机材料学报, 2023, 38(4): 421-428. |
[14] | 游钧淇, 李策, 杨栋梁, 孙林锋. 氧化物双介质层忆阻器的设计及应用[J]. 无机材料学报, 2023, 38(4): 387-398. |
[15] | 方仁瑞, 任宽, 郭泽钰, 徐晗, 张握瑜, 王菲, 张培文, 李悦, 尚大山. 基于氧化物基电解质栅控晶体管突触的关联学习[J]. 无机材料学报, 2023, 38(4): 399-405. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||