高级检索
无机材料学报

无机材料学报

• 研究论文 • 上一篇    下一篇

铌合金硅化物涂层的结构及高温抗氧化性

王禹; 郜嘉平; 李云鹏; 胡行方   

  1. 中国科学院上海硅酸盐研究所, 上海 200050
  • 收稿日期:1999-08-12 修回日期:1999-09-07 出版日期:2000-02-20 网络出版日期:2000-02-20

Microstructure and Oxidation-resistance of Silicide Coatings on C-103 Niobium Alloys

WANG Yu; GAO Jia-Ping; LI Yun-Peng; HU Xing-Fang   

  1. Shanghai Institute of Ceramics; Chinese Academy of Sciences; Shanghai 200050; China
  • Received:1999-08-12 Revised:1999-09-07 Published:2000-02-20 Online:2000-02-20

PDF (PC)

1008

被引次数

56

摘要： 分析了Ｃ－１０３铌合金不同改性成分的Ｔｉ－Ｃｒ－Ｓｉ硅化物涂层在氧化前后组织结构的变化，以及改性成分和涂层结构对高温抗氧化性的影响，结果表明，Ｇｅ、Ｍｏ和Ｗ改性的涂层结构不利于高温抗氧化性能的改善，添加Ｚｒ和Ａｌ后，其涂层组织结构有利干提高高温抗氧化性．

关键词: 添加元素, 硅化物涂层, 高温抗氧化性

Abstract: The microstructure of Ti-Cr-Si protective coatings modified by different additives onC-103 niobium alloys before and after oxidation and the influence of these additives on the structureand oxidation resistance of the silicide coatings were studied. The results show that the oxidationresistance of Ti-Cr-Si coating modified by Ge, Mo, W decreases, but the oxidation resistance ofTi-Cr-Si coating modified by Zr and Al increases at high temperature.

Key words: additives, silicide coating, high temperature oxidation resistance

中图分类号: