Variations of Conductivities of NaOH-KOH Molten Salt during the Process of Synthesis of BaTiO3

Journal of Inorganic Materials

• Research Paper • Previous Articles Next Articles

Variations of Conductivities of NaOH-KOH Molten Salt during the Process of Synthesis of BaTiO₃

BAI Yu-Xia; WANG Shu-Lan; LI Ying

Box 332; Northeastern University; Shenyang 110004; China

Received:2001-06-04 Revised:2001-07-06 Published:2002-05-20 Online:2002-05-20

Abstract

Abstract: The conductivities of eutectic NaOH-KOH molten salt during the process of forming BaTiO₃ from BaCO₃ and TiO₂ were measured by A.C. impedance method at 350℃. Results showed that the accurate conductivity of eutectic NaOH-KOH molten salt at 350℃ was 1.053Ω^-1· cm^-1. The dissolution of BaCO₃ and TiO₂ in NaOH-KOH of eutectic component at 350℃ reached equilibrium in a short time, and NaOH and KOH did not react with BaCO₃ and TiO₂ at 350℃.

Key words: BaTiO₃, conductivity, NaOH-KOH eutectic salt

CLC Number:

TF123

BAI Yu-Xia,WANG Shu-Lan,LI Ying. Variations of Conductivities of NaOH-KOH Molten Salt during the Process of Synthesis of BaTiO₃[J]. Journal of Inorganic Materials.

[1]	CHEN Qiang, BAI Shuxin, YE Yicong. Highly Thermal Conductive Silicon Carbide Ceramics Matrix Composites for Thermal Management: a Review [J]. Journal of Inorganic Materials, 2023, 38(6): 634-646.
[2]	ZHANG Shuo, FU Qiangang, ZHANG Pei, FEI Jie, LI Wei. Influence of High Temperature Treatment of C/C Porous Preform on Friction and Wear Behavior of C/C-SiC Composites [J]. Journal of Inorganic Materials, 2023, 38(5): 561-568.
[3]	FU Shi, YANG Zengchao, LI Honghua, WANG Liang, LI Jiangtao. Mechanical Properties and Thermal Conductivity of Si₃N₄ Ceramics with Composite Sintering Additives [J]. Journal of Inorganic Materials, 2022, 37(9): 947-953.
[4]	HU Jiajun, WANG Kai, HOU Xinguang, YANG Ting, XIA Hongyan. Boron Phosphide with High Thermal Conductivity: Synthesis by Molten Salt Method and Thermal Management Performance [J]. Journal of Inorganic Materials, 2022, 37(9): 933-940.
[5]	WEI Tingting, XU Huarui, ZHU Guisheng, LONG Shenfeng, ZHANG Xiuyun, ZHAO Yunyun, JIANG Xupeng, SONG Jinjie, GUO Ningjie, GONG Yipeng. Preparation and Properties of BaTiO₃ Ceramics by Low Temperature Cold Sintering [J]. Journal of Inorganic Materials, 2022, 37(8): 903-910.
[6]	WANG Pengjiang, KANG Huijun, YANG Xiong, LIU Ying, CHENG Cheng, WANG Tongmin. Inhibition of Lattice Thermal Conductivity of ZrNiSn-based Half-Heusler Thermoelectric Materials by Entropy Adjustment [J]. Journal of Inorganic Materials, 2022, 37(7): 717-723.
[7]	ZHAO Yuyao, OUYANG Jun. Columnar Nanograined BaTiO₃ Ferroelectric Thin Films Integrated on Si with a Sizable Dielectric Tunability [J]. Journal of Inorganic Materials, 2022, 37(6): 596-602.
[8]	DING Jianxiang, ZHANG Kaige, LIU Dongming, ZHENG Wei, ZHANG Peigen, SUN Zhengming. Ag-based Electrical Contact Material Reinforced by Ti₃AlC₂ Ceramic and Its Derivative Ti₃C₂T_x [J]. Journal of Inorganic Materials, 2022, 37(5): 567-573.
[9]	RUAN Jing, YANG Jinshan, YAN Jingyi, YOU Xiao, WANG Mengmeng, HU Jianbao, ZHANG Xiangyu, DING Yusheng, DONG Shaoming. Porous SiC Ceramic Matrix Composite Reinforced by SiC Nanowires with High Strength and Low Thermal Conductivity [J]. Journal of Inorganic Materials, 2022, 37(4): 459-466.
[10]	LOU Xunuo, DENG Houquan, LI Shuang, ZHANG Qingtang, XIONG Wenjie, TANG Guodong. Thermal and Electrcial Transport Properities of Ge Doped MnTe Thermoelectrics [J]. Journal of Inorganic Materials, 2022, 37(2): 209-214.
[11]	LI Wenkai, ZHAO Ning, BI Zhijie, GUO Xiangxin. Na₃Zr₂Si₂PO₁₂ Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property [J]. Journal of Inorganic Materials, 2022, 37(2): 189-196.
[12]	FAN Shuai, JIN Tian, ZHANG Shanlin, LUO Xiaotao, LI Chengxin, LI Changjiu. Effect of Li₂O Sintering Aid on Sintering Characteristics and Electrical Conductivity of LSGM Electrolyte for Solid Oxide Fuel Cell [J]. Journal of Inorganic Materials, 2022, 37(10): 1087-1092.
[13]	ZHANG Keyi, ZHENG Qi, WANG Lianjun, JIANG Wan. Preparation and Characterization of Ag₂Se-based Ink Used for Inkjet Printing [J]. Journal of Inorganic Materials, 2022, 37(10): 1109-1115.
[14]	LI Sheng, SONG Guoqiang, ZHANG Yuanyuan, TANG Xiaodong. Preparation and Physical Property of BTO-based Multiferroic Ceramics [J]. Journal of Inorganic Materials, 2022, 37(1): 79-85.
[15]	WANG Weide, CHEN Huanbei, LI Shishuai, YAO Dongxu, ZUO Kaihui, ZENG Yuping. Preparation of Silicon Nitride with High Thermal Conductivity and High Flexural Strength Using YbH₂-MgO as Sintering Additive [J]. Journal of Inorganic Materials, 2021, 36(9): 959-966.

Variations of Conductivities of NaOH-KOH Molten Salt during the Process of Synthesis of BaTiO₃

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments