Congruent Growth of Cu2Se Thermoelectric Thin Films Enabled by Using High Ablation Fluence During Pulsed Laser Deposition

doi:10.15541/jim20150197

Abstract

Abstract:

The importance of the laser ablation fluence in congruent growth of Cu₂Se thermoelectric thin films during pulsed laser deposition was shown in this work. By using a larger laser ablation fluence, a more consistent composition between as-grown thin films and the target material has been realized in the pulsed laser deposition of Cu₂Se films. This is associated with the enhanced plasma shielding effect, which weakens direct laser-solid interaction when increasing laser fluence. Reducing the ablation fluence can obviously increase the amount of the copper deficiencies, due to more effective laser ablation of Se (higher vapor pressure) than that of Cu when the laser direct lasser-solid interaction becomes more efficient. Apart from tuning the ablation fluence, thermoelectric performances of as-grown Cu₂Se thin films are further optimized as a function of the used argon background gas pressures. The maximum thermoelectric performance of the Cu₂Se thin film can be obtained when using the highest ablation fluence (~10 J/cm²) and a low argon background pressure(~10^-1 Pa).

Key words: Cu2Se film, pulsed laser deposition, thermoelectric, ablation fluence

CLC Number:

TQ174

LV Yan-Hong, CHEN Ji-Kun, DOBELI Max, LI Yu-Long, SHI Xun, CHEN Li-Dong. Congruent Growth of Cu₂Se Thermoelectric Thin Films Enabled by Using High Ablation Fluence During Pulsed Laser Deposition[J]. Journal of Inorganic Materials, 2015, 30(10): 1115-1120.

Figures/Tables 5

Fig. 1 (a) Composition of CuxSe thin films grown in vacuum using different ablation fluences, (b) deviation in the copper composition of as-grown thin films as compared to the target (Cu2.06Se): (x-2.06)/2.06 and (c) X-ray diffraction of the CuxSe thin films grown using an ablation fluence of 10 J/cm2 and 5 J/cm2

Fig. 2 (a) SEM micrographs of surface as well as cross section morphologies of CuxSe films grown using various ablation fluences and (b) electrical conductivity (σ), Seebeck coefficient (S) and power factor (PF) of as-grown CuxSe thin films using various ablation fluences

Fig. 3 Sputter yield of Cu and Se atoms in a 10 nm Cu2Se layer by the arriving Cu+ or Se+ with various incoming energies, estimated by stopping and range of ions in matter

Fig. 4 Electrical conductivity (σ), Seebeck coefficient (S) and power factor (PF) of as-grown CuxSe thin films using an ablation fluence of 10 J/cm2 at various argon background pressures

Fig. 5 (a) Power factor (PF) of as-grown CuxSe thin films using an ablation fluence of 10 J/cm2 or 5 J/cm2 at various argon background pressures and (b) Comparison of the surface morphology of the CuxSe grown at 5 Pa argon pressure using 10 J/cm2 and 5 J/cm2 ablation fluence

References 28

[1]	LIU H L, SHI X, XU F F, et al.Copper ion liquid-like thermoelectrics.Nature Materials, 2012 11(5): 422-425.
[2]	LIU H L, YUAN X, LU P, et al.Ultrahigh thermoelectric performance by electron and phonon critical scattering in Cu2Se1-xIx.Advanced Materials, 2013, 25(45): 6607-6612.
[3]	CHEN L D, XIONG Z, BAI S Q.Recent progress of thermoelectric nano-composites.Journal of Inorganic Materials, 2010, 25(6): 561-568.
[4]	ZHAN B, LAN J L, LIU Y C, et al.Research progress of oxides thermoelectric materials.Journal of Inorganic Materials, 2014, 29(3): 237-244.
[5]	SNYDER G J, TOBERER E S.Complex thermoelectric materials.Nature Materials, 2008, 7(2): 105-114.
[6]	CHEN J, LV Y H, DÖBELI M, et al. Composition control of pulsed laser deposited copper (I) chalcogenide thin films via plasma/Ar interactions.Science China Materials, 2015, DOI: 10.1007/s40843-015-0022-9.
[7]	LV Y H, CHEN J K, ZHENG R K, et al.(001)-oriented Cu2-ySe thin films with tunable thermoelectric performances grown by pulsed laser deposition.Ceramics International, 2015, 41(6): 7439-7445.
[8]	CHEN J K, PALLA-PAPAVLU A, LI Y L, et al. Laser deposition and direct-writing of thermoelectric misfit cobaltite thin films. Applied Physics Letters, 2014, 2014, 104(23): 231907-1-5.
[9]	HE H, XIAO M, ZHONG Q, et al.Influence of laser pulse energy on the microstructure and optical properties of Cu2ZnSnS4 films by one-step pulsed laser deposition.Ceramics International, 2014, 40(8): 13263-13267.
[10]	CHEN J K.Analysis of Laser-Induced Plasmas Utilizing 18O2 as Oxygen Tracer, Ph. D. Thesis, ETH Zurich, 2014.
[11]	LOWNDES D H, GEOHEGAN D B, PIRETZKY A A, et al.Synthesis of novel thin-film materials by pulsed laser deposition.Science, 1996, 273(5277): 898-903.
[12]	WILLMOTT P R, HUBER J R.Pulsed laser vaporization and deposition.Reviews of Modern Physics, 2000, 72(1): 315-328.
[13]	CHEN J K, DÖBELI M, STENDER D, et al. Plasma interactions determine the composition in pulsed laser deposited thin films. Applied Physics Letters, 2014, 105(11): 114104-1-5.
[14]	WICKLEIN S, SAMBRI A, AMORUSO S, et al. Pulsed laser ablation of complex oxides: the role of congruent ablation and preferential scattering for the film stoichiometry. Applied. Physics Letters, 2012, 101(13): 131601-1-5.
[15]	STURM K, KREBS H U.Quantification of resputtering during pulsed laser deposition.Journal of Applied Physics, 2001, 90(2): 1061-1063.
[16]	FÄHLER S, STURM K, KREBS H U. Resputtering during the growth of pulsed-laser-deposited metallic films in vacuum and in an ambient gas.Applied Physics Letters, 1999, 75(24): 3766-3768.
[17]	GONZALO J, SIEGEL J, PEREA A, et al.Imaging self-sputtering and backscattering from the substrate during pulsed laser deposition of gold.Physical Review B, 2007, 76(3): 035435.
[18]	XU C, WICKLEIN S, SAMBRI A, et al.Impact of the interplay between nonstoichiometry and kinetic energy of the plume species on the growth mode of SrTiO3 thin films.Journal of Physics D-Applied Physics, 2014, 47(3): 034009.
[19]	LIU Q Z, LIU J J, LI B, et al. Composition dependent metal-semiconductor transition in transparent and conductive La-doped BaSnO3 epitaxial films. Applied Physics Letters, 2012, 101(24): 241901-1-5.
[20]	MCLAUGHLIN M, SAKEEK H F, MAGUIRE P, et al.Properties of ZnS thin-films prepared by 248-nm pulsed-laser deposition.Applied Physics Letters, 1993, 63(14): 1865-1867.
[21]	SHEN W P, KWOK H S.Crystalline phases of II-VI compound semiconductors grown by pulsed-laser deposition.Applied Physics Letters, 1994, 65(17): 2162-2164.
[22]	MAKALA R S, JAGANNADHAM K, SALES B C.Pulsed laser deposition of Bi2Te3-based thermoelectric thin films.Journal of Applied Physics, 2003, 94(6): 3907-3918.
[23]	LI BASSI A, BAILINI A, CASARI C S, et al. Thermoelectric properties of Bi-Te films with controlled structure and morphology. Journal of Applied Physics, 2009, 105(12): 124307-1-9.
[24]	LIDE DAVID R (ed). CRC Handbook of Chemistry and Physics, 84th Edition. CRC Press. Boca Raton, Florida, 2003; Section 6, Fluid Properties; Vapor Pressure.
[25]	MARLA D, BHANDARKAR U V, JOSHI S S. Critical assessment of the issues in the modeling of ablation and plasma expansion processes in the pulsed laser deposition of metals. Journal of Applied Physics, 2011, 109(2): 021101-1-15.
[26]	WU B X, SHIN Y C. Modeling of nanosecond laser ablation with vapor plasma formation. Journal of Applied Physics, 2006, 99(8): 084310-1-8.
[27]	FANG R R, ZHANG D M, LI Z H, et al.Laser-target interaction during high-power pulsed laser deposition of superconducting thin films.Physica Status Solidi a-Applications and Materials Science, 2007, 204(12): 4241-4248.
[28]	WITTMAACK K.Reliability of a popular simulation code for predicting sputtering yields of solids and ranges of low-energy ions.Journal of Applied Physics, 2004, 96(5): 2632-2637.

Congruent Growth of Cu₂Se Thermoelectric Thin Films Enabled by Using High Ablation Fluence During Pulsed Laser Deposition

RichHTML

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

Figures/Tables 5

References 28

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	WANG Bo, YU Jian, LI Cuncheng, NIE Xiaolei, ZHU Wanting, WEI Ping, ZHAO Wenyu, ZHANG Qingjie. Service Stability of Gd/Bi_0.5Sb_1.5Te₃ Thermo-electro-magnetic Gradient Composites [J]. Journal of Inorganic Materials, 2023, 38(6): 663-670.
[2]	HE Danqi, WEI Mingxu, LIU Ruizhi, TANG Zhixin, ZHAI Pengcheng, ZHAO Wenyu. Heavy-Fermion YbAl₃ Materials: One-step Synthesis and Enhanced Thermoelectric Performance [J]. Journal of Inorganic Materials, 2023, 38(5): 577-582.
[3]	LIN Siqi, LI Airan, FU Chenguang, LI Rongbing, JIN Min. Crystal Growth and Thermoelectric Properties of Zintl Phase Mg₃X₂ (X=Sb, Bi) Based Materials: a Review [J]. Journal of Inorganic Materials, 2023, 38(3): 270-279.
[4]	HUA Siheng, YANG Dongwang, TANG Hao, YUAN Xiong, ZHAN Ruoyu, XU Zhuoming, LYU Jianan, XIAO Yani, YAN Yonggao, TANG Xinfeng. Effect of Surface Treatment of n-type Bi₂Te₃-based Materials on the Properties of Thermoelectric Units [J]. Journal of Inorganic Materials, 2023, 38(2): 163-169.
[5]	WANG Pengjiang, KANG Huijun, YANG Xiong, LIU Ying, CHENG Cheng, WANG Tongmin. Inhibition of Lattice Thermal Conductivity of ZrNiSn-based Half-Heusler Thermoelectric Materials by Entropy Adjustment [J]. Journal of Inorganic Materials, 2022, 37(7): 717-723.
[6]	CHENG Cheng, LI Jianbo, TIAN Zhen, WANG Pengjiang, KANG Huijun, WANG Tongmin. Thermoelectric Property of In₂O₃/InNbO₄ Composites [J]. Journal of Inorganic Materials, 2022, 37(7): 724-730.
[7]	LOU Xunuo, DENG Houquan, LI Shuang, ZHANG Qingtang, XIONG Wenjie, TANG Guodong. Thermal and Electrcial Transport Properities of Ge Doped MnTe Thermoelectrics [J]. Journal of Inorganic Materials, 2022, 37(2): 209-214.
[8]	LIU Dan, ZHAO Yaxin, GUO Rui, LIU Yantao, ZHANG Zhidong, ZHANG Zengxing, XUE Chenyang. Effect of Annealing Conditions on Thermoelectric Properties of Magnetron Sputtered MgO-Ag₃Sb-Sb₂O₄ Flexible Films [J]. Journal of Inorganic Materials, 2022, 37(12): 1302-1310.
[9]	REN PeiAn, WANG Cong, ZI Peng, TAO Qirui, SU Xianli, TANG Xinfeng. Effect of Te and In Co-doping on Thermoelectric Properties of Cu₂SnSe₃ Compounds [J]. Journal of Inorganic Materials, 2022, 37(10): 1079-1086.
[10]	JIN Min, BAI Xudong, ZHANG Rulin, ZHOU Lina, LI Rongbin. Metal Sulfide Ag₂S: Fabrication via Zone Melting Method and Its Thermoelectric Property [J]. Journal of Inorganic Materials, 2022, 37(1): 101-106.
[11]	YANG Dongwang, LUO Tingting, SU Xianli, WU Jinsong, TANG Xinfeng. Unveiling the Intrinsic Low Thermal Conductivity of BiAgSeS through Entropy Engineering in SHS Kinetic Process [J]. Journal of Inorganic Materials, 2021, 36(9): 991-998.
[12]	ZHANG Cencen, WANG Xue, PENG Liangming. Thermoelectric Transport Characteristics of n-type (PbTe)_1-_x_-_y(PbS)_x(Sb₂Se₃)_y Systems via Stepwise Addition of Dual Components [J]. Journal of Inorganic Materials, 2021, 36(9): 936-942.
[13]	LU Xu, HOU Jichong, ZHANG Qiang, FAN Jianfeng, CHEN Shaoping, WANG Xiaomin. Effect of Mg Content on Thermoelectric Property of Mg₃₍₁₊_z₎Sb₂ Compounds [J]. Journal of Inorganic Materials, 2021, 36(8): 835-840.
[14]	CAI Jianfeng, WANG Hongxiang, LIU Guoqiang, JIANG Jun. Designing High Entropy Structure in Thermoelectrics [J]. Journal of Inorganic Materials, 2021, 36(4): 399-404.
[15]	YANG Qingyu, QIU Pengfei, SHI Xun, CHEN Lidong. Application of Entropy Engineering in Thermoelectrics [J]. Journal of Inorganic Materials, 2021, 36(4): 347-354.